JUNOSe 9.1.x Command Reference Guide A to M > I Commands > ip rip send version

ip rip send version

Description: 

Restricts the RIP version that the router can send on an interface. The no version sets the interface back to the default value, sending only RIP version 1.

Syntax: 

ip rip send version { 1 | 2 | 1 2 | 2 1 | off }

no ip rip send version

• 1—Specifies RIP version 1 only
• 2—Specifies RIP version 2 only
• 1 2—Specifies RIP version 1 and version 2
• 2 1—Specifies RIP version 2 and version 1
• off—Turns reception off

Mode(s): 

Interface Configuration, Subinterface Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.