JUNOSe 9.1.x Command Reference Guide A to M > I Commands > ip pim send-rp-announce

ip pim send-rp-announce

Description: 

Sends autoRP announcement messages from a router you configured as an RP. The no version clears the specified filters from this interface.

Syntax: 

ip pim send-rp-announce interfaceType interfaceSpecifier scope ttl
[ group-list ipAccessList] [ interval seconds ]

no ip pim send-rp-announce interfaceType interfaceSpecifier [ scope ttl ]
[ group-list ipAccessList ] [ interval seconds ]

• interfaceType—Interface type; see Interface Types and Specifiers in About This Guide
• interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers in About This Guide. The autoRP announcement messages will contain the IP address for this interface.
• ttl—Time-to-live value; the number of hops for which the announcement is valid in the range 1–65535; default value is 64 hops
• ipAccessList—Name of the IP access list that specifies which multicast groups use this RP; default value is no access list
• seconds—Time interval in the range 1–65535 seconds at which the router sends the announcements; default value is 60 seconds

Mode(s): 

Global Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.