ip pim bfd-liveness-detection
Enables BFD (bidirectional forwarding detection) on an interface running PIM and defines BFD values to be negotiated between PIM neighbors for detection of IP data path failures. The no version disables BFD on the PIM interface.
ip pim bfd-liveness-detection [ minimum-interval minInterval |
[ minimum-receive-interval minRecInterval ]
[ minimum-transmit-interval minTransInterval ] ] [ multiplier multValue ]no ip pim bfd-liveness-detection
- minInterval—Minimum proposed transmit interval and required receive interval for BFD control packets; number in the range 100–65535 milliseconds; default value is 300 milliseconds
- minRecInterval—Minimum interval at which the local router must receive BFD control packets sent by its neighbors; number in the range 100–65535 milliseconds; default value is 300 milliseconds
- minTransInterval—Minimum proposed interval between BFD control packets sent by the local router; number in the range 100–65535 milliseconds; default value is 300 milliseconds
- multValue—Detection multiplier value that the remote neighbor multiplies by the local router's negotiated transmit interval to determine the remote neighbor's BFD liveness detection interval; equal to the number of BFD packets that can be missed before the BFD session is declared down; number in the range 1–255; default value is 3
Interface Configuration
Release Information Command introduced in JUNOSe Release 8.0.0.