JUNOSe 9.1.x Command Reference Guide A to M > I Commands > ip inspect tcp

ip inspect tcp

Description: 

Defines the synwait timer, finwait timer, or idle-time value for TCP flows. The no version restores the default value.

Syntax: 

ip inspect tcp { finwait-time | idle-time | synwait-time } timerValue

no ip inspect tcp { finwait-time | idle-time | synwait-time }

• timerValue—Number of seconds in the following ranges and defaults for each timer:

• finwait-time—Range is 1–65535; default value is 5
• idle-time—Range is 1–65535; default value is 3000
• synwait-time—Range is 1–65535; default value is 30

Mode(s): 

Global Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.