JUNOSe 9.1.x Command Reference Guide A to M > E-F-G-H Commands > frame-relay lmi-type

frame-relay lmi-type

Description: 

Selects the LMI type. The no version restores the default value.

Syntax: 

frame-relay lmi-type type

no frame-relay lmi-type

• type—One of the following types:

• ansi—ANSI T1.617 Annex D
• cisco—Original Group of Four specification developed by DEC, Northern Telecom, Stratacom, and Cisco
• q933a—ITU-T Q.933 Annex A
• none—No management interface is used

Mode(s): 

Interface Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.

    Related Topics    

Configuring Frame Relay Layer 2 Services