JUNOSe 9.1.x Command Reference Guide A to M > E-F-G-H Commands > frame-relay lmi-t392dce

frame-relay lmi-t392dce

Description: 

Sets the polling verification timer (T392) on a DCE interface. The no version removes current setting and sets the default.

Syntax: 

frame-relay lmi-t392dce seconds

no frame-relay lmi-t392dce

• seconds—Number in the range 5–30 seconds; specifies the expected interval in seconds between status inquiries issued by the DTE equipment; default value is 15 seconds

Mode(s): 

Interface Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.