JUNOSe 9.1.x Command Reference Guide A to M > D Commands > debug ip pim

debug ip pim

Description: 

Shows information about the selected variable. The no version disables the display.

Syntax: 

The syntax differs for PIM Dense Mode and PIM Sparse Mode.

PIM Dense Mode:

debug ip pim { pimLog [ severity { severityValue | severityNumber } ]
[ verbosity verbosityLevel ] | switchState groupAddress sourceAddress |
dense-mode { on | off } }

PIM Sparse Mode:

debug ip pim { pimLog [ severity { severityValue | severityNumber } ]
[ verbosity verbosityLevel ] | switchState groupAddress sourceAddress |
sparse-mode { on | off | sg-state [ group groupAddress
[ source sourceAddress ] | rp rpAddress ] [ count ] } }

no debug ip pim pimLog

• pimLog—PIM log of interest; one of the following options:

• autoRp-rcvd—Auto-RP packets received
• autoRP-sent—Auto-RP packets sent
• engineering—PIM engineering
• hellos-rcvd—PIM hello messages received
• hellos-sent—PIM hello messages sent
• packets—PIM packets received and sent
• packets-rcvd—PIM packets received
• packets-sent—PIM packets sent

• severity—Specifies the minimum severity of the log messages displayed for the selected category. See the debug ip bgp command.
• verbosityLevel—Verbosity of the log category's messages. See the debug ip bgp command.
• switchState—Switches from one type of tree to another

• rpt-switch—Switch from a shortest-path tree to a shared path tree
• spt-switch—Switch from a shared-path tree to a shortest path tree

• groupAddress—IP address of the multicast group
• sourceAddress—IP address of the multicast source
• on—Turns on the specified PIM mode on all virtual routers
• off—Turns off the specified PIM mode on all virtual routers
• sg-state—Displays information about the relationship between a source, multicast group, and RP router
• rp—Displays information about the relationships between sources, groups, and the specified RP router
• rpAddress—Address of the RP router
• count—Displays one of the following

• (with no optional keywords) number of relationships between a source, multicast group, and RP router
• (with the group keyword) number of sources associated with the multicast group for PIM sparse mode
• (with the source and group keywords) number of source-group pairs for PIM sparse mode
• (with the rp keyword) number of source-group pairs associated with the RP router for PIM sparse mode

Mode(s): 

Privileged Exec

    Release Information    Command introduced before JUNOSe Release 7.1.0.