JUNOSe 9.1.x Command Reference Guide A to M > D Commands > dsr-detect

dsr-detect

Description: 

Requires that a DSR signal be detected on the line for a user to log into the console. DSR is carried on pin 6 of the SRP module's RS-232 (DB-9) connector. The DSR input must be connected to the DSR output of a modem or the DTR output of another DTE device, such as a terminal server, that supports this signal. If a session is in progress and the DSR signal is lost, the user is logged out automatically. The no version restores the default of no DSR required.

Syntax: 

[ no ] dsr-detect

Mode(s): 

Privileged Exec

    Release Information    Command introduced before JUNOSe Release 7.1.0.