JUNOSe 9.1.x Command Reference Guide A to M > D Commands > disable-switch-on-error

disable-switch-on-error

Description: 

Prevents the redundant SRP module from taking over if the primary SRP module experiences a software failure or if you push the reset button on the primary SRP module. Issue the sync command immediately before you issue this command. The no version restores the default situation, in which the redundant SRP module takes over if the primary SRP module experiences a failure.

Syntax: 

[ no ] disable-switch-on-error

Mode(s): 

Global Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.