debug ipv6 pim
Shows information about the selected variable. The no version disables the display.
debug ipv6 pim
{ pimLog [ severity { severityValue | severityNumber } ] [ verbosity verbosityLevel ] |
switchState groupAddress sourceAddress |
dense-mode { on | off } |
sparse-mode { on | off | sg-state [ group groupAddress
[ source sourceAddress ] | rp rpAddress ] [ count ] } }
- autoRp-rcvd—Auto-RP packets received
- autoRP-sent—Auto-RP packets sent
- engineering—PIM engineering
- hellos-rcvd—PIM hello messages received
- hellos-sent—PIM hello messages sent
- packets—PIM packets received and sent
- packets-rcvd—PIM packets received
- packets-sent—PIM packets sent
- severity—Specifies the minimum severity of the log messages displayed for the selected category. See the debug ip bgp command.
- verbosityLevel—Verbosity of the log category's messages. See the debug ip bgp command.
- switchState—Switches from one type of tree to another
- rpt-switch—Switch from a shortest-path tree to a shared path tree
- spt-switch—Switch from a shared-path tree to a shortest path tree
- groupAddress—IPv6 address of the multicast group
- sourceAddress—IPv6 address of the multicast source
- on—Turns on the specified PIM mode on all virtual routers
- off—Turns off the specified PIM mode on all virtual routers
- sg-state—Displays information about the relationship between a source, multicast group, and RP router
- rp—Displays information about the relationships between sources, groups, and the specified RP router
- rpAddress—Address of the RP router
- count—Displays one of the following
- (with no optional keywords) number of relationships between a source, multicast group, and RP router
- (with the group keyword) number of sources associated with the multicast group for PIM sparse mode
- (with the source and group keywords) number of source-group pairs for PIM sparse mode
- (with the rp keyword) number of source-group pairs associated with the RP router for PIM sparse mode
Privileged Exec
Release Information Command introduced before JUNOSe Release 7.1.0.