JUNOSe 9.1.x Command Reference Guide A to M > B Commands > bgp dampening

bgp dampening

Description: 

Enables BGP route dampening. The router assesses a penalty of 1000 each time a route flaps and adds this to any previously accumulated penalty value. Penalties are cumulative. The no version disables route flap dampening.

Syntax: 

[ no ] bgp dampening [ halfLife [ reuse suppress maxSuppressTime
[ halfLifeUnreachable ] ] ] [ route-map mapTag ]

• halfLife—Half-life period in minutes in the range 1–45; default value is 15. When a BGP route has been assigned a penalty, the penalty is decreased by half after the half-life period.
• reuse—Reuse limit in the range 1–20000; default value is 750. As the penalty for a flapping route decreases and falls below this reuse limit, the route is unsuppressed. That is, the route is added back to the BGP table and used for forwarding.
• suppress—Suppress limit in the range 1–20000; default value is 2000. A route is suppressed when its penalty exceeds this limit.
• maxSuppressTime—Maximum suppression time in minutes in the range 1–255. This value is the maximum amount of time a route can be suppressed. The default value is four times the half-life value.
• halfLifeUnreachable—Alternate half-life period in minutes for unreachable routes; a number in the range 1–45. If this value is not specified, the same half-life period is used for both reachable and unreachable routes.
• route-map—Specifies that dampening can be applied to routes according to the route map behavior. If the route map permits a route, the route is subject to dampening. If the route map denies a route, the route is not subject to dampening. The route map can contain a no dampening clause that determines dampening characteristics.
• mapTag—Name of the route map; a string of up to 32 alphanumeric characters.

Mode(s): 

Address Family Configuration, Router Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.