JUNOSe 9.1.x Command Reference Guide A to M > B Commands > baseline ppp interface

baseline ppp interface

Description: 

Sets a statistics baseline for PPP interfaces. The router implements the baseline by reading and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved. There is no no version.

Syntax: 

baseline ppp interface { atm | mlppp | pos | serial } interfaceSpecifier

• atm—Specifies an ATM interface
• mlppp—Specifies an MLPPP interface
• pos—Specifies a POS interface
• serial—Specifies a serial interface
• interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers in About This Guide

Mode(s): 

Privileged Exec

    Release Information    Command introduced before JUNOSe Release 7.1.0.