JUNOSe 9.1.x Command Reference Guide A to M > B Commands > bridge

bridge

Description: 

Creates a bridge group to use for transparent bridging. A bridge group is a named collection of network interfaces (ports) on an E-series router that forms a broadcast domain. Each bridge group has its own set of forwarding tables and filters and, as such, functions as a logical bridging device. The no version removes the bridge group configuration from the router.

To configure an existing bridge group as a VPLS instance, you must use the bridge vpls transport-virtual-router command.

NOTE: Do not assign the bridge group the same name as an existing virtual router configured on the router.

Syntax: 

[ no ] bridge bridgeGroupName

• bridgeGroupName—Name of the bridge group; string of up to 32 alphanumeric characters

Mode(s): 

Global Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.