JUNOSe 9.1.x Command Reference Guide A to M > A Commands > aaa service accounting interval

aaa service accounting interval

Description: 

Specifies the default accounting interval used for services on the virtual router—the Service Manager application uses this setting for RADIUS-initiated services when no value is specified in the Service-Interim-Acct-Interval VSA (Juniper VSA 26-140). The no version restores the default setting of 0, which turns off interim accounting for services associated with users attached to this virtual router.

NOTE: This command and the aaa user accounting interval command replace the deprecated aaa accounting interval command, which may be removed completely in a future release.

Syntax: 

aaa service accounting interval period

no aaa service accounting interval

• period—Accounting interval in minutes in the range 10–1440, which sets the time period between accounting updates for services associated with users on this virtual router; 0 is the default

Mode(s): 

Global Configuration

    Release Information    Command introduced in JUNOSe Release 9.0.0.