JUNOSe 9.1.x Command Reference Guide A to M > A Commands > aaa authentication enable default

aaa authentication enable default

Description: 

Allows privilege determination to be authenticated through the authenticator(s) you specify. This authentication is applied to vty users. The no version removes the authentication settings.

Syntax: 

aaa authentication enable default authenticator [ authenticator ]*

no aaa authentication enable default

• authenticator—Authentication method:

• enable—Use the enable password
• line—Use the line password
• none—Use no authentication
• radius—Use RADIUS authentication
• tacacs+—Use TACACS+ authentication
• *—Indicates that one or more parameters can be repeated multiple times in a list in the command line

Mode(s): 

Global Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.