JUNOSe 9.1.x Command Reference Guide A to M > A Commands > atm framing

atm framing

Description: 

Configures T3 or E3 framing on an ATM interface. The no version returns framing to the default. For a T3 interface, the default value is cbitplcp. For an E3 interface, the default value is g751plcp.

Syntax: 

atm framing framingType

no atm framing

• framingType—One of the following:

• cbitadm—c-bit with ATM direct mapping for a DS3 (T3) interface
• cbitplcp—c-bit with PLCP framing for a DS3 (T3) interface (default for T3)
• g832adm—G.832 ATM direct mapping for an E3 interface
• g751adm—G.751 ATM direct mapping for an E3 interface
• g751plcp—G.751 PLCP mapping for an E3 interface (default for E3)
• m23adm—M23 ATM direct mapping for a DS3 (T3) interface
• m23plcp—M23 with PLCP framing for a DS3 (T3)

Mode(s): 

Interface Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.