JUNOSe 9.1.x Command Reference Guide A to M > A Commands > atm clock internal

atm clock internal

Description: 

Causes the ATM interface to generate the transmit clock internally. The no version causes ATM interfaces to recover the clock from the received signal. If the internal clock is chosen and no internal source is specified, then the internal clock source is taken from the line module.

Syntax: 

[ no ] atm clock internal [ internalSource ]

• internalSource—One of the following:

• module—Specifies that the internal clock is from the line module
• chassis—Specifies that the internal clock is from the configured router clock

Mode(s): 

Interface Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.