JUNOSe 9.1.x Command Reference Guide A to M > A Commands > aaa authentication default

aaa authentication default

Description: 

Specifies the authentication method used for a particular type of subscriber. The no version produces the same result as specifying the radius value.

Syntax: 

aaa authentication subscriberType default authenticator [ authenticator ]*

no aaa authentication subscriberType default

• subscriberType—Type of subscriber:

• atm1483—Specifies ATM 1483 subscribers
• ip—Specifies IP subscriber management interfaces
• ipsec—Specifies IPSec subscribers
• ppp—Specifies PPP subscribers
• radius-relay—Specifies RADIUS relay server subscribers
• tunnel—Specifies tunnel subscribers

• authenticator—Authentication method:

• none—Disables authentication, allowing all users access
• local—Enables local authentication; supported for PPP subscribers only
• radius—Enables RADIUS for authentication
• *—Indicates that one or more parameters can be repeated multiple times in a list in the command line

Mode(s): 

Global Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.