[Contents] [Prev] [Next] [Report an Error]

FE-8 SFP Module Combination (8 Ports) (256-MB Memory)

Line module label GE/FE

I/O module label FE-8 SFP I/O

Number of I/O ports

8

Software release

First supported: 6.0.0

Final supported: Not applicable

Description

130 W

Fast Ethernet

The FE-8 SFP I/O module uses a range of small form-factor pluggable (SFP) transceivers to support different modes and cable lengths.

Type

EFA ASIC

Capability

IEEE 802.3 standards compliance

100Base-FX

Software features

See Ethernet Modules for information about the layer 2 and layer 3 protocols and applications that this module combination supports.

Model compatibility

ERX-7xx models

ERX-14xx models

ERX-310 router

SRP module compatibility

SRP-5G+

SRP-10G

SRP-40G

SRP-40G PLUS

SRP-SE10G

Module redundancy support

Not applicable

Cables and connectors (single-mode fiber)

LC full duplex

Tx power:

min: –15 dBm

max: –8 dBm

Center wavelength: 1300 nm

Rx input power:

min: –28 dBm

max: –14 dBm

Rated for 10 km (6.2 miles) over 9-micron core cable

See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.

Cables and connectors (multimode fiber)

LC full duplex

Tx power: –20 dBm minimum and –14 dBm maximum

Center wavelength: 850 nm

Rx input power: –31 dBm minimum and –14 dBm maximum

Rated for 2 km (1.2 miles) over 62.5/125-micron core cable

See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.

LEDs

See Module LEDs.

Alarms, errors, and events

See Monitoring Ethernet Interfaces in JUNOSe Physical Layer Configuration Guide, Chapter 5, Configuring Ethernet Interfaces.

[Contents] [Prev] [Next] [Report an Error]

Line module label	GE/FE
I/O module label	FE-8 SFP I/O
Number of I/O ports	8
Software release	First supported: 6.0.0 Final supported: Not applicable
Description	130 W Fast Ethernet The FE-8 SFP I/O module uses a range of small form-factor pluggable (SFP) transceivers to support different modes and cable lengths.
Type	EFA ASIC
Capability	IEEE 802.3 standards compliance 100Base-FX
Software features	See Ethernet Modules for information about the layer 2 and layer 3 protocols and applications that this module combination supports.
Model compatibility	ERX-7xx models ERX-14xx models ERX-310 router
SRP module compatibility	SRP-5G+ SRP-10G SRP-40G SRP-40G PLUS SRP-SE10G
Module redundancy support	Not applicable
Cables and connectors (single-mode fiber)	LC full duplex Tx power: min: –15 dBm max: –8 dBm Center wavelength: 1300 nm Rx input power: min: –28 dBm max: –14 dBm Rated for 10 km (6.2 miles) over 9-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
Cables and connectors (multimode fiber)	LC full duplex Tx power: –20 dBm minimum and –14 dBm maximum Center wavelength: 850 nm Rx input power: –31 dBm minimum and –14 dBm maximum Rated for 2 km (1.2 miles) over 62.5/125-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
LEDs	See Module LEDs.
Alarms, errors, and events	See Monitoring Ethernet Interfaces in JUNOSe Physical Layer Configuration Guide, Chapter 5, Configuring Ethernet Interfaces.