| Module label | ES2 10G UPLINK LM |
| Number of ports |
|
| Software release |
|
| Description |
-
150 W
-
Acts as frame forwarding engines for the physical interfaces
-
Processes up to 10 Gb of data traffic
-
Pairs with ES2–S2 10GE PR IOA only
-
In a SRP-100 configuration, it must be installed in a
turbo slot only (slot 2 or slot 4)
-
If you install the line module in a slot other than slot
2 or slot 4, it will be disabled
-
If you install a LM-10 Uplink module next to a configured
line module that is already installed in slot 3 or slot 5, the LM-10
Uplink module will be disabled
-
If you install a line module in slot 3 or slot 5 next
to a previously installed LM-10 Uplink module, the non-LM-10 Uplink
module will be disabled
-
In a SRP-120 and SRP-320 configuration, it can be installed
in any slot
|
| Type |
|
| Capability |
-
Supports a line rate of 128–byte frames on IOAs
-
The 100–Gbps switch fabric allocates 3.4 Gbps of
overall bandwidth to each regular line module slot and 10 Gbps of
overall bandwidth to each of the turbo slots (slot 2 and slot 4).
-
The 120–Gbps and 320–Gbps switch fabrics allocate
10 Gbps of overall bandwidth to each line module slot.
-
See JUNOSe System Basics Configuration Guide,
Chapter 6, Managing Modules for more information.
|
| Software features |
|
| Model compatibility |
|
| Line module compatibility |
|
| SRP module compatibility |
|
| Line module redundancy
compatibility |
-
Yes (Redundancy IOA must be installed in either slot 0
or slot 11)
-
Can only back up another ES2 10G UPLINK LM
|
| Port redundancy support |
|
| Cables and connectors |
|
| LEDs | When lit, LED indicates:
-
OK (green)—Self-test passed
-
FAIL (red)—Failure detected
-
ONLINE (green)—Online with no alarms or errors
-
REDUN (green)—Redundant card available
|
| Alarms, errors, and events |
-
See Monitoring Modules in JUNOSe System Basics Configuration Guide, Chapter 6, Managing
Modules.
|
