[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Table of Contents
-
About This Guide
-
-
Objectives
-
Audience
-
E-series Routers
-
Documentation Conventions
-
-
List of Technical Publications
-
Obtaining Documentation
-
Documentation Feedback
-
Requesting
Technical Support
-
Product Overview
-
-
E120 and E320 Overview
-
-
System Description
-
Chassis Overview
-
-
E320 Model
-
E120 Model
-
E120 and E320 Modules
-
-
SRP Module
-
-
Module Details
-
Nonvolatile Storage
-
SFM Module
-
-
Fabric Slices
-
SRP IOA
-
-
Module Details
-
Line Modules
-
-
Packet Classification
-
I/O Adapters
-
Network Management Tools
-
-
CLI Management
-
SNMP MIB Management
-
Redundancy Features
-
-
SRP Modules
-
-
NVS Cards
-
Power
-
Fans
-
Initial Installation
-
-
Unpacking and Inspecting the Router
-
-
Before You Begin
-
Unpacking the Router
-
Inspecting Router Components and Accessories
-
If You Detect or Suspect Damage
-
Contacting Juniper Networks
-
The Next Step
-
Installing the Router
-
-
Before You Begin
-
Freestanding Installation
-
Rack-Mounted Installation
-
-
Installation Guidelines
-
Preparing the Equipment Racks
-
Installing the Router
-
The Next Step
-
Installing Modules
-
-
Overview
-
-
Slot Numbering
-
IOA Slot Combinations
-
Module Combinations
-
IOAs Requiring SFPs
-
Proper Handling of ES2 4G LMs
-
ES2 10G Uplink Line Modules
-
Managing Modules Using the Software
-
Order of Installation
-
Hot-Swapping Modules
-
Protecting Modules and Slots
-
Required Tools and Safety Items
-
Safety Guidelines
-
Installing an SRP Module or SFM Module
-
Installing an IOA Shelf
-
Installing a Line Module or an IOA
-
Removing Modules and IOAs
-
Installing and Removing SFPs
-
-
Installing SFPs
-
Removing SFPs
-
The Next Step
-
Cabling the Router
-
-
Cabling Overview
-
Required Tools, Wires, and Cables
-
Cabling the SRP IOA
-
-
Network Timing Ports
-
Management Ports
-
-
Connecting to the Network
-
Connecting to
a Console Terminal
-
Cabling IOAs
-
-
LC Duplex Connectors
-
SFPs
-
Cabling the Router for Power
-
-
Task 1: Turn Off All Router Power
-
Task 2: Connect the Grounding Cables
-
Task 3: Connect the Power Cables
-
The Next Step
-
Powering Up the Router
-
-
Before You Power Up the System
-
Powering Up
-
-
Initialization Sequence
-
Status LEDs
-
Powering Down
-
The Next Step
-
Accessing E-series Routers
-
-
Setting Up Management Access
-
Console Port Setup
-
-
Using HyperTerminal
-
Connecting Directly to the Router
-
Assigning an IP Address
-
Telnet Setup
-
SNMP
-
The Next Step
-
Hardware Maintenance, Replacement, and Troubleshooting
Procedures
-
-
Maintaining the Router
-
-
Required Tools and Items
-
Storing Modules and Components
-
Cleaning the System
-
Upgrading NVS Cards on SRP Modules
-
-
Upgrading a System That Contains One SRP Module
-
Upgrading a System That Contains Two SRP Modules
-
Replacing an NVS Card
-
Replacing Fan Trays
-
-
Removing an E320 Fan Tray
-
Installing an E320 Fan Tray
-
Installing an Air Filter
-
Replacing a Power Distribution Unit
-
Troubleshooting
-
-
Diagnosing Problems
-
-
Initialization Sequence
-
Troubleshooting Power Failures
-
Understanding Status LEDs to Troubleshoot
-
-
LED Identification
-
LED Activity
-
Monitoring Temperatures of Modules
-
Resetting Line Modules and SRP Modules
-
Double-Bit Errors on SRP Modules
-
-
Detecting Double-Bit Errors
-
Fixing Double-Bit Errors
-
Appendixes
-
-
System Specifications
-
-
E120 Router Specifications
-
E320 Router Specifications
-
Installation Guidelines and Requirements
-
-
Your Preinstallation Responsibilities
-
Environmental Requirements
-
Regulatory Compliances
-
Safety Guidelines
-
Equipment Rack Requirements
-
-
Mechanical Requirements
-
Space Requirements
-
Proper Rack Installation
-
Cabling Recommendations
-
Product Reclamation and Recycling Program
-
Hardware Compliance
-
-
Federal Communications Commission (FCC) Statement
-
FCC Requirements for Consumer Products
-
Food and Drug Administration, Center for Devices and Radiological
Health
-
Canadian Department of Communications Radio Interference Regulations
-
Réglement sur le brouillage radioélectrique du
ministère des communications
-
Industry Canada Notice CS-03
-
Avis CS-03 d'Industrie Canada
-
D.O.C. Explanatory Notes: Equipment Attachment Limitations
-
Notes explicatives du ministère des Communications:
limites visant les accessoires
-
EC Declaration of Conformity
-
Voluntary Control Council for Interference (VCCI) Statement
for Japan
-
Cable Pinouts
-
-
SRP IOA
-
Contacting Customer Support and Returning Hardware
-
-
Contacting Customer Support
-
Return Procedure
-
Locating Component Serial Numbers
-
Information You Might Need to Supply to JTAC
-
Tools and Parts Required
-
Returning
Products for Repair or Replacement
-
-
Packing Instructions for Returning a
Chassis
-
Declaration of Conformity
-
-
Declaration of Conformity – E120 Router
-
Declaration of Conformity – E320 Router
-
Index
-
-
Index
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
