[Contents] [Prev] [Next] [Report an Error]

T3 ATM Module Combination (4 Ports) (128 MB)

This module combination is no longer supported because the line module has reached end-of-life. However, the I/O module is still supported.

Line module label OCx/STMx ATM or OCx/STMx /DS3-ATM

I/O module label 4xDS3 ATM I/O

Number of I/O ports

4

Software release

First supported: 4.1.0

Final supported: 5.2.x

Description

130 W

Unchannelized T3 for ATM

Type

ASIC

Capability

ATM/AAL5

Software features

See ERX Module Guide, Appendix A, Module Protocol Support for information about the layer 2 and layer 3 protocols and applications that this module combination supports.

Model compatibility

ERX-7xx models

ERX-14xx models

ERX-310 router

SRP module compatibility

SRP-5G+

SRP-10G

SRP-40G

SRP-40G PLUS

SRP-SE10G

Module redundancy support

1:N redundancy

Cables and connectors

75-ohm connector

The line interface unit supports two line buildouts:

0–68.5 m (0–225 feet)

69–137 m (226–450 feet)

Signal strength is software controlled.

The transmitted signal complies with ANSI T1.102-1993 Digital Hierarchy - Electrical Interfaces (1999) for cable lengths up to 201 m (660 feet).

LEDs

See ERX Module Guide, Appendix B, Module LEDs.

Alarms, errors, and events

See Monitoring Interfaces in the Configuring T3 and E3 Interfaces chapter of the JUNOSe Physical Layer Configuration Guide for Release 8.0.x and earlier.

[Contents] [Prev] [Next] [Report an Error]

Line module label	OCx/STMx ATM or OCx/STMx /DS3-ATM
I/O module label	4xDS3 ATM I/O
Number of I/O ports	4
Software release	First supported: 4.1.0 Final supported: 5.2.x
Description	130 W Unchannelized T3 for ATM
Type	ASIC
Capability	ATM/AAL5
Software features	See ERX Module Guide, Appendix A, Module Protocol Support for information about the layer 2 and layer 3 protocols and applications that this module combination supports.
Model compatibility	ERX-7xx models ERX-14xx models ERX-310 router
SRP module compatibility	SRP-5G+ SRP-10G SRP-40G SRP-40G PLUS SRP-SE10G
Module redundancy support	1:N redundancy
Cables and connectors	75-ohm connector The line interface unit supports two line buildouts: 0–68.5 m (0–225 feet) 69–137 m (226–450 feet) Signal strength is software controlled. The transmitted signal complies with ANSI T1.102-1993 Digital Hierarchy - Electrical Interfaces (1999) for cable lengths up to 201 m (660 feet).
LEDs	See ERX Module Guide, Appendix B, Module LEDs.
Alarms, errors, and events	See Monitoring Interfaces in the Configuring T3 and E3 Interfaces chapter of the JUNOSe Physical Layer Configuration Guide for Release 8.0.x and earlier.