Guidelines for Configuring Byte Adjustment of Shaping Using QoS Parameters
When you specify the byte adjustment application, the following considerations apply:
- You can have only one QoS parameter definition with the byte adjustment application configured.
- You can specify only instance-interface types of ethernet, svlan, and vlan.
- You can specify only an subscriber-interface type of vlan.
- The available range for parameters with the byte adjustment application is -32–63. You cannot configure another range using the range command.
- To configure hierarchical parameters for the byte adjustment application, we recommend that you apply the byte adjustment parameter at the lowest interface column so that upper interfaces automatically have the parameter.
- Byte Adjustment for Shaping Overview
- Configuring a Parameter Definition for Byte Adjustment
- Example: QoS Parameter Configuration for QoS Cell Mode and Byte Adjustment
- For more information about configuring shaping modes for Ethernet, see QoS Shaping Mode for Ethernet Interfaces Overview and Cell Shaping Mode Using QoS Parameters Overview