JUNOSe 9.0.x Broadband Access Configuration Guide > Monitoring and Troubleshooting Remote Access > Setting Baselines for Remote Access

Setting Baselines for Remote Access

You can set baseline statistics using the baseline commands. The router implements the baseline by reading and storing the statistics at the time the baseline is set and then subtracting this baseline when you retrieve baseline-relative statistics.

baseline aaa

• Use to set a baseline for AAA statistics.
• Use the delta keyword with the show aaa statistics command to show baselined statistics.
• There is no no version.

baseline aaa route-download

• Use to set a baseline for route downloads.
• Example

host1#baseline aaa route-download 

• There is no no version.

baseline cops

• Use to set a baseline for COPS statistics.
• Use the delta keyword with the show cops statistics command to show baselined statistics.
• There is no no version.

baseline local pool

• Use to set a baseline for local address pool statistics.
• Use the delta keyword with the show local pool statistics command to show baselined statistics.
• There is no no version.

baseline radius

• Use to set a baseline for RADIUS statistics.
• Use the delta keyword with the show radius statistics command to show baselined statistics.
• There is no no version.

baseline sscc

• Use to set a baseline for SRC statistics.
• Use the delta keyword with the show sscc statistics command to show baselined statistics.
• There is no no version.