JUNOSe 9.0.x Broadband Access Configuration Guide > Monitoring and Troubleshooting Remote Access

Monitoring and Troubleshooting Remote Access

Use the commands in this chapter to set baselines for and to monitor remote access.

• Setting Baselines for Remote Access
• Monitoring Remote Access

These commands provide information about:

• AAA configuration
• AAA profiles
• AAA statistics
• Address pools
• COPS protocol layer
• Domain name delimiters
• Name servers
• RADIUS servers
• RADIUS SNMP traps
• RADIUS statistics
• SRC client connections
• Subscribers
• User domain mapping

Use the following commands to monitor PPP interfaces:

• show ppp interface summary
• show ppp interface <selective control>

For details on the show ppp commands, see JUNOSe Link Layer Configuration Guide, Chapter 4, Configuring Point-to-Point Protocol.

You can use the output filtering feature of the show command to include or exclude lines of output based on a text string you specify. For details, see JUNOSe System Basics Configuration Guide, Chapter 2, Command-Line Interface.

NOTE: AAA and RADIUS statistics are not preserved across a warm restart when stateful SRP Switchover is enabled.