JUNOSe 9.0.x BGP and MPLS Configuration Guide > Monitoring Layer 2 Services over MPLS > Setting Baselines for Layer 2 Services over MPLS Statistics

Setting Baselines for Layer 2 Services over MPLS Statistics

You can use the baseline mpls interface command to set statistics baselines for all MPLS major interface statistics on the specified interface. The router implements the baseline by reading and storing the statistics at the time the baseline is set and then subtracting this baseline when you retrieve baseline-relative statistics.

Use the delta keyword with the show mpls commands to display baselined statistics. The following statistics are maintained for each MPLS shim interface:

receive packets and octets	transmit packets and octets
receive discarded packets	transmit discarded packets
receive error packets	transmit error packets

Purpose

Set baselines for statistics related to layer 2 services over MPLS.

Action

To set a statistics baseline for layer 2 services over MPLS:

host1#baseline mpls interface

Related Topics

• baseline mpls interface command