JUNOSe 9.0.x BGP and MPLS Configuration Guide > Monitoring L2VPNs > Clearing BGP Attributes for the L2VPN or VPWS Address Family

Clearing BGP Attributes for the L2VPN or VPWS Address Family

You can use clear ip bgp commands to clear BGP attributes for the L2VPN address family and, in one case, for the VPWS address family associated with a specific L2VPN (VPWS) instance.

For more information about using these commands, see Chapter 1, Configuring BGP Routing.

Purpose

Clear BGP attributes for the L2VPN address family or the VPWS address family.

Action

To clear BGP reachability information for the L2VPN address family:

host1#clear ip bgp l2vpn soft in

To clear route flap dampening information for the L2VPN address family, or for the VPWS address family associated with the specified L2VPN (VPWS) instance.

host1#clear ip bgp l2vpn dampening

host1#clear ip bgp vpws l2vpnA dampening

To clear the wait for receiving and End-of-RIB marker from the peer for the L2VPN address family:

host1#clear ip bgp l2vpn wait-end-of-rib

Related Topics

• clear ip bgp command
• clear ip bgp dampening command
• clear ip bgp wait-end-of-rib command