JUNOSe 9.0.x Command Reference Guide N to Z > T-U-V-W-X-Y-Z Commands > telnet listen

telnet listen

Description: 

Sets the Telnet daemon to listen in a virtual router other than the default. The no version deletes the Telnet daemon.

Syntax: 

telnet listen [ port portValue ]

no telnet listen

• portValue—TCP port on which the Telnet daemon listens; if not specified, uses the default, port 23

Mode(s): 

Global Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.