JUNOSe 9.0.x Command Reference Guide N to Z > N Commands > network area

network area

Description: 

Defines the interfaces on which OSPF runs and the area ID for those interfaces. The no version deletes OSPF interfaces, ranges, and areas.

NOTE: Before you issue this command, you must first configure one or more interfaces with an IP address that is within the range specified by ipNet.

Syntax: 

[ no ] network ipNet maskWildCard area { areaId | areaIdInt }

• ipNet—Network number
• maskWildCard—Wild-card mask for the network number
• areaId—OSPF area ID in IP address format
• areaIdInt—OSPF area ID as a decimal value, in the range 0–4294967295

Mode(s): 

Router Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.