neighbor timers
Sets keepalive and hold-time timers for the specified neighbor or peer group. Overrides values set for the router with the timers bgp command. The no version restores the default values.
neighbor { ipAddress | ipv6Address | peerGroupName } timers keepaliveTime holdTime
no neighbor { ipAddress | ipv6Address | peerGroupName } timers [ keepaliveTime ]
[ holdTime ]
- ipAddress—IP address of BGP neighbor
- ipv6Address—IPv6 address of BGP neighbor
- peerGroupName—Name of a BGP peer group. If you specify a BGP peer group by using the peerGroupName argument, all the members of the peer group inherit the characteristic configured with this command, unless it is overridden for a specific peer.
- keepaliveTime—Interval in seconds between keepalive messages, in the range 0–65535 seconds; default value is 30 seconds; a value of zero prevents BGP from sending keepalive messages
- holdTime—Period in seconds that BGP waits for keepalive messages before declaring the neighbor to be unavailable, in the range 0–65535 seconds; default value is 90 seconds; a value of zero informs BGP not to expect any keepalive messages
Address Family Configuration, Router Configuration
Release Information Command introduced before JUNOSe Release 7.1.0.
ipv6Address variable added in JUNOSe Release 8.0.0.