JUNOSe 9.0.x Command Reference Guide N to Z > N Commands > neighbor prefix-tree

neighbor prefix-tree

Description: 

Assigns an inbound or outbound prefix tree. The no version removes the prefix tree.

Syntax: 

neighbor { ipAddress | ipv6Address | peerGroupName }
prefix-tree prefixTreeName { in | out }

no neighbor { ipAddress | ipv6Address | peerGroupName }
prefix-tree [ prefixTreeName ] { in | out }

• ipAddress—IP address of BGP neighbor
• ipv6Address—IPv6 address of BGP neighbor; valid only under the IPv4 address family for advertising IPv4 routes over BGP IPv6 peers
• peerGroupName—Name of a BGP peer group. If you specify a BGP peer group by using the peerGroupName argument, all the members of the peer group inherit the characteristic configured with this command, unless it is overridden for a specific peer.
• prefixTreeName—Name of a BGP prefix tree
• in—Assigns prefix tree to incoming routes (inbound policy)
• out—Assigns prefix tree to outgoing routes (outbound policy); you cannot configure a member of a peer group to override the inherited peer group characteristic for outbound policy

Mode(s): 

Address Family Configuration, Router Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.
ipv6Address variable added in JUNOSe Release 8.0.0.