JUNOSe 9.0.x Command Reference Guide N to Z > N Commands > neighbor prefix-list

neighbor prefix-list

Description: 

Assigns an inbound or outbound prefix list. The no version removes the prefix list.

Syntax: 

neighbor { ipAddress | ipv6Address | peerGroupName } prefix-list
prefixListName { in | out }

no neighbor { ipAddress | ipv6Address | peerGroupName } prefix-list
[ prefixListName ] { in | out }

• ipAddress—IP address of BGP neighbor
• ipv6Address—IPv6 address of BGP neighbor
• peerGroupName—Name of a BGP peer group. If you specify a BGP peer group by using the peerGroupName argument, all the members of the peer group inherit the characteristic configured with this command, unless it is overridden for a specific peer.
• prefixListName—Name of a BGP prefix list
• in—Assigns prefix list to incoming routes (inbound policy)
• out—Assigns prefix list to outgoing routes (outbound policy); you cannot configure a member of a peer group to override the inherited peer group characteristic for outbound policy

Mode(s): 

Address Family Configuration, Router Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.
ipv6Address variable added in JUNOSe Release 8.0.0.