Monitoring the Configuration of an ICR Partition Attached to
an Interface
Purpose
Display
information about the ICR partition configured on an interface.
Action
host1#show icr-partition fastEthernet 3/5/0.1 1
ICR Partition ID: part1A
ICR Partition State: Master
ICR Partition Grouping Criterion: SVLAN
SVLAN VLAN control-interface vrrp-mac advertise-mac
-----------------------------------------------------------------------
100 Any enabled disabled enabled
101 Any enabled disabled disabled
102 Any enabled disabled disabled
103 Any enabled disabled disabled
104 Any enabled disabled disabled
105 Any enabled disabled disabled
106 Any enabled disabled disabled
107 Any enabled disabled disabled
108 Any enabled disabled disabled
109 Any enabled disabled disabled
-----------------------------------------------------------------------
ICR Partition has 10 group members.
Meaning
Table 1 lists the show
icr-partition command output fields.
Table 1: show icr-partition
Output Fields
Field Name
|
Field Description
|
ICR Partition ID
|
Identifier for the ICR partition.
|
ICR Partition State
|
State of the ICR partition:
- Master—ICR partition that accepts subscriber login
requests.
- Backup—ICR partition that does not accept subscriber
login requests.
- Dormant—When the IP address or virtual router is
forcibly deleted, or if the lower interface is not available, the
ICR partition moves to the Dormant state. The dormant ICR partition
does not accept subscriber login requests.
Note:
The state of the ICR partition depends on the associated
VRRP instance.
|
ICR Partition Grouping Criterion
|
Grouping option for the subscribers. Possible options:
S-VLAN and VLAN. The default grouping option is S-VLAN.
|
SVLAN
|
S-VLAN identifier for the interface.
|
VLAN
|
VLAN identifier for the interface. Any indicates that the VLAN ID is a wildcard and you can specify any
configured VLAN ID with the associated S-VLAN ID.
|
control-interface
|
Controls traffic on the interface. Possible states: enabled
or disabled. If the status is enabled and the interface is part of
the backup partition, the router changes the state of the interface
to Admindown and blocks all traffic to the interface. If the status
is disabled, the router does not control traffic on the interface.
|
vrrp-mac
|
Configures the interface to use the default MAC address
instead of the VRRP MAC address. Possible states: enabled or disabled.
If the status is enabled, the interface uses the default MAC address;
otherwise, the interface uses the VRRP MAC address.
|
advertise-mac
|
Enables the interface to transmit GARP advertisments
when the partition moves from backup state to master state. Possible
states: enabled or disabled. If the status is enabled, the interface
transmits GARP advertisements; otherwise, the interface does not transmit
GARP advertisements.
|
Published: 2009-10-07
