[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Setting the Mask Value for MPLS Rate-Limit Profiles
You can use the exp-mask command to set the mask value used for MPLS rate-limit profiles,
in the range 1–255. The no version
restores the default value, 7. This command is associated
with the committed-action, conformed-action, and exceeded-action commands.
- Issue the exp-mask command
from Rate Limit Profile Configuration mode.
- host1(config-rate-limit-profile)#exp-mask
5
Related Topics
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
