Monitoring the Policy Configuration of IP Interfaces

host1#show ip interface atm 11/0.6

ATM11/0.6 line protocol Atm1483 is down, ip is down (ready)
  Network Protocols: IP
  Internet address is 10.12.1.1/255.255.255.0
  Broadcast address is 255.255.255.255
  Operational MTU = 0  Administrative MTU = 0
  Operational speed = 100000000  Administrative speed = 0
  Discontinuity Time = 0
  Router advertisement = disabled
  Proxy Arp = disabled
  ARP spoof checking = enabled
  Network Address Translation is disabled
  TCP MSS Adjustment = disabled
  Administrative debounce-time = disabled 
  Operational debounce-time    = disabled 
  Access routing = disabled 
  Multipath mode = hashed
  Auto Configure = disabled
  Auto Detect = disabled
  Re-Authenticate Auto Detect = disabled
  Inactivity Timer = disabled
  Use Framed Routes = disabled
  Warm-restart initial-sequence-preference: Operational = 0 Administrative = 0

  In Received Packets 0, Bytes 0
    Unicast Packets 0, Bytes 0
    Multicast Packets 0, Bytes 0
  In Policed Packets 0, Bytes 0
  In Error Packets 0
  In Invalid Source Address Packets 0
  In Discarded Packets 0
  Out Forwarded Packets 0, Bytes 0
    Unicast Packets 0, Bytes 0
    Multicast Routed Packets 0, Bytes 0
  Out Scheduler Dropped Packets 0, Bytes 0
  Out Policed Packets 0, Bytes 0
  Out Discarded Packets 0

  IP policy output testPol
    classifier-group *
      0 packets, 0 bytes
      forward
         Virtual-router: default
         List:
           interface ATM11/0.1, order 100, rule 2 (not supported in output
           policy)
           next-hop 1.1.1.1, order 100, rule 3 (active) (not supported in
           output policy)
      rate-limit-profile R2
        committed rate: 0 bps, committed burst: 0 bytes (default)
        peak rate: 0 bps, peak burst: 0 bytes (default)
        committed: 0 packets, 0 bytes, action: transmit conditional
        conformed: 0 packets, 0 bytes, action: transmit conditional
        exceeded:  0 packets, 0 bytes, action: drop
      log
    classifier-group video entry 1
      0 packets, 0 bytes
      filter

Field Name	Field Description
Network Protocols	Protocols configured on the interface
Internet address	IP address of the interface
Broadcast address	Broadcast address used by the interface
Operational MTU	Operational maximum transmission unit (MTU) for packets sent on this interface
Administrative MTU	Administrative maximum transmission unit for packets sent on this interface
Operational speed	Speed known to the IP layer in bits per second; equal to the administrative speed if configured, otherwise inherited from the lower layer
Administrative speed	Configured speed known to the IP layer in bits per second
Discontinuity Time	Time since the counters on the interface became invalid; for example, when the line module was reset
Router Advertisement	When enabled by the ip irdp command, the router advertises its presence via the ICMP Router Discovery Protocol (IRDP)
Administrative debounce-time	Administrative time delay that an interface must remain in a new state before the routing protocols react to the state change
Operational debounce-time	Time delay that an interface must remain in a new state before the routing protocols react to the state change
Access routing	When enabled, an access route is installed to the host on the other end of the interface
In Received Packets	Number of packets received on the interface; indicates whether packets are unicast or multicast
In Received Bytes	Number of bytes received on the interface; indicates whether bytes are unicast or multicast
In Policed Packets	Number of packets policed on the interface; discarded because they exceeded a traffic contract to their destination
In Policed Bytes	Number of bytes policed on the interface; discarded because they exceeded a traffic contract to their destination
In Error Packets	Number of packets determined to be in error at the interface
In Invalid Source Address Packets	Number of packets determined to have originated from an invalid source address
Out Forwarded Packets	Number of packets forwarded from the interface; indicates whether packets are unicast or multicast
Out Forwarded Bytes	Number of bytes forwarded from the interface; indicates whether bytes are unicast or multicast
Out Scheduler Drops Packets	Number of packets dropped by the out scheduler; indicates whether packets are committed, conformed, or exceeded
Out Scheduler Drops Bytes	Number of bytes dropped by the out scheduler; indicates whether bytes are committed, conformed, or exceeded
Policy	Indicates which policy is attached and whether it is on the input or output of the interface
classifier-group	Name of a CLACL attached to the interface and number of entry
exception http-redirect	Number of packets and bytes assigned to http-redirect
filter	Number of packets and bytes dropped because of the CLACL
color	Explicit color applied to packet flow for queuing; green, yellow, or red:
Packets logged	Number of packets colored
Bytes logged	Number of bytes colored
next hop	Address of the next-hop destination:
Packets transmitted	Number of packets sent to the next-hop address
Bytes transmitted	Number of bytes sent to the next-hop address
forward	Number of packets and bytes forwarded because of the CLACL
interface	Interface rule to forward all packets that match the current classifier control list
next-hop	Next-hop IP addresses are used as forwarding solutions, and the order of the rule within the classifier that the router uses to choose the solutions. The phrase in parenthesis describes whether the rule entry is reachable, active, and supported for the configured policy
rate-limit-profile	Name of the rate-limit profile
committed	Number of packets and bytes within the committed rate limit
conformed	Number of packets and bytes exceeding the committed rate limit but within the peak rate
exceeded	Number of packets and bytes exceeding the peak rate
action	Action performed on the packets matched by the rules in the rate-limit profile

Purpose

Action

Meaning

Related Topics