Configuring Point-to-Point Protocol over Ethernet

This chapter describes how to configure the Point-to-Point Protocol (PPP) over Ethernet interfaces on E Series routers.

This chapter contains the following sections:

• Overview
• Platform Considerations
• References
• Before You Configure PPPoE
• Configuring PPPoE over ATM
• Configuring PPPoE for Ethernet Modules
• Configuring PADM Messages
• Configuring PADN Messages
• Configuring PPPoE Service Name Tables
• Configuring PADS Packet Content
• Configuring PPPoE Remote Circuit ID Capture
• Monitoring PPPoE
• Troubleshooting

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.