| Module label |
ES2 10G ADV LM |
| Number of ports |
|
| Software release |
|
| Description |
- 190 W maximum
- Acts as frame forwarding engines for the physical interfaces
- Processes up to 10 Gb of data traffic
- Pairs with ES2–S2 10GE PR IOA, ES2-S1 REDUND IOA,
ES2–S3 GE-20 IOA, and ES2–S1 GE-8 IOA
- In an SRP-320 configuration, it can be installed in any
slot
|
| Type |
|
| Capability |
- Supports a line rate of 128–byte frames on IOAs
- The 100–Gbps switch fabric allocates 3.4 Gbps of
overall bandwidth to each regular line module slot and 10 Gbps of
overall bandwidth to each of the turbo slots (slot 2 and slot 4).
- The 320–Gbps switch fabrics allocate 10 Gbps of
overall bandwidth to each line module slot.
- See JUNOSe System Basics Configuration Guide,
Chapter 6, Managing Modules for more information.
|
| Software features |
|
| Line module compatibility |
|
| SRP module compatibility |
|
| Line module redundancy
compatibility |
- Yes (Redundancy IOA must be installed in either slot 0
or slot 11)
- Can back up another ES2 10G ADV LM or ES2 10G LM
|
| Port redundancy support |
|
| Cables and connectors |
|
| LEDs |
When lit, LED indicates:
- OK (green)—Self-test passed
- FAIL (red)—Failure detected
- ONLINE (green)—Online with no alarms or errors
- REDUN (green)—Redundant card available
|
| Alarms, errors, and events |
- See Monitoring Modules in JUNOSe System Basics Configuration Guide, Chapter 6, Managing
Modules.
|
