List of Figures

Figure 1: Constructing an IP Policy List

Figure 2: Multiple Flows Sharing Preferred Bandwidth

Figure 3: Multiple Packet Flows Sharing a Rate Limit

Figure 4: Shared Pool of Additional Bandwidth with Select Flows

Figure 5: Aggregate Marking with Oversubscription

Figure 6: Congestion Management

Figure 7: Input Policy with Primary Stage and Auxiliary Substage

Figure 8: Configuration Process

Figure 9: VLAN Rate-Limit Configuration

Figure 10: Interface Stack for Wholesale L2TP Mode

Figure 11: Wholesale L2TP Configuration

Figure 12: Interface Stack for Aggregate Rate Limit

Figure 13: Aggregate Rate Limit for Nonvoice Traffic Configuration

Figure 14: Interface Stack for Arbitrary Interface Groups

Figure 15: Arbitrary Interface Groups Configuration

Figure 16: Interface Stack for Service and User Rate-Limit Hierarchy Overlap

Figure 17: Service and User Rate-Limit Hierarchy Overlap Configuration

Figure 18: CLI-Based Interface Mirroring

Figure 19: CLI-Based Packet Mirroring

Figure 20: RADIUS-Based Packet Mirroring

Figure 21: Prepended Header

Figure 22: 8-Byte Format of VSA 26-59

Figure 23: 4-Byte Format of VSA 26-59

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.