slep

Description

Point-to-Point Protocol layer

Emergency

None

Alert

None

Critical

Startup interface out of resources failure

Error

Remove or unbind interface failure; unknown or missing lower binding failure

Warning Log

Attempt to set characteristics with invalid value

Notice Log

None

Info

Hardware state change notification

Debug

None

Filter

serial interfaceSpecifier

• serial—Logs SLEP events for a specific serial Cisco-HDLC interface
• interfaceSpecifier—Identifier for a serial Cisco-HDLC interface

  Note: For information about interface types and specifiers, see Interface Types and Specifiers in JUNOSe Command Reference Guide.

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.