[Contents] [Prev] [Next] [Index] [Report an Error]

BFD Version Support

The JUNOSe software supports both BFD Version 0 and BFD Version 1. When establishing a BFD neighbor session, the E Series router attempts to establish version 0 or version 1 sessions based on the capability of the BFD neighbor. Table 7 indicates how the routers establish sessions based on BFD version support:

Table 7: Determining BFD Versions

		E Series Routers Running JUNOSe 7.2.x (and later)	E Series Routers Running Software Versions Earlier than JUNOSe 7.2.x
	BFD Version Support	Version 0 and Version 1	Version 0 Only
E Series Routers Running JUNOSe 7.2.x (and later) and Other Routers	Version 0 and Version 1	Result = Version 1	Result = Version 0
E Series Routers Running Software Versions Earlier than JUNOSe 7.2.x and Other Routers	Version 0 Only	Result = Version 0	Result = Version 0
Other Routers	Version 1 Only	Result = Version 1	No session (version mismatch)

Note: You cannot configure the JUNOSe software to send BFD Version 0 or BFD Version 1 packets. The JUNOSe software determines the BFD version through auto-negotiation.

[Contents] [Prev] [Next] [Index] [Report an Error]