[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring Ethernet/VLAN Layer 2 Services

To configure Ethernet/VLAN layer 2 services over MPLS:

  1. Configure the Ethernet/VLAN interface.
    host1(config)#interface fastEthernet 4/0
    host1(config-if)#encapsulation vlan
    host1(config-if)#interface fastEthernet 4/0.3
    host1(confi-if)#vlan id 201
  2. Specify MPLS tunneling by using the appropriate command.
    host1(config-if)#mpls-relay 10.10.100.2 45

    or

    host1(config-if)#route interface tunnel mpls:tunnel6 45
  3. Configure Ethernet/VLAN and MPLS on the remote PE router.

Related Topics

[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.