[Contents] [Prev] [Next] [Report an Error]

SFM-320 Module

Module label SFM-320

IOA label

Not applicable

Number of IOA ports

Not applicable

Software release

First supported: 7.3.0

Description

95 W

Switch fabric module (320 Gbps)

Works with the SRP-320 module to create a switch fabric

The 320–Gbps fabric allocates 10 Gbps of overall bandwidth to each line module slot.

Must be installed only with SRP-320 module and SFM–320 modules

Capability

Not applicable

Software features

Not applicable

Model compatibility

E320 router

E120 router

Line module compatibility

ES2 4G LM

ES2 10G UPLINK LM

SRP module compatibility

SRP-320

Cannot use with SRP-100 module or SFM-100 module

Module redundancy support

N+1 redundancy

Port redundancy support

Not applicable

Cables and connectors

Not applicable

LEDs When lit, LED indicates:

OK (green)—Self-test passed

FAIL (red)—Failure detected

ONLINE (green)—Online with no alarms or errors

REDUN (green)—N+1 redundancy is enabled; 2 SRPs and 3 SFMs must be installed and working. When LED is unlit, one of the five fabric slices is down or not installed; N+1 redundancy is not enabled.

When REDUN LED is on, the module may be removed without interrupting service.

Alarms, errors, and events

See Monitoring Modules in JUNOSe System Basics Configuration Guide, Chapter 6, Managing Modules.

[Contents] [Prev] [Next] [Report an Error]

Module label	SFM-320
IOA label	Not applicable
Number of IOA ports	Not applicable
Software release	First supported: 7.3.0
Description	95 W Switch fabric module (320 Gbps) Works with the SRP-320 module to create a switch fabric The 320–Gbps fabric allocates 10 Gbps of overall bandwidth to each line module slot. Must be installed only with SRP-320 module and SFM–320 modules
Capability	Not applicable
Software features	Not applicable
Model compatibility	E320 router E120 router
Line module compatibility	ES2 4G LM ES2 10G UPLINK LM
SRP module compatibility	SRP-320 Cannot use with SRP-100 module or SFM-100 module
Module redundancy support	N+1 redundancy
Port redundancy support	Not applicable
Cables and connectors	Not applicable
LEDs	When lit, LED indicates: OK (green)—Self-test passed FAIL (red)—Failure detected ONLINE (green)—Online with no alarms or errors REDUN (green)—N+1 redundancy is enabled; 2 SRPs and 3 SFMs must be installed and working. When LED is unlit, one of the five fabric slices is down or not installed; N+1 redundancy is not enabled. When REDUN LED is on, the module may be removed without interrupting service.
Alarms, errors, and events	See Monitoring Modules in JUNOSe System Basics Configuration Guide, Chapter 6, Managing Modules.