Creating Policy Lists for MPLS

The following example creates an MPLS policy list.

1. Create the policy list routeForMpls.

   host1(config)#mpls policy-list routeForMpls

   host1(config-policy-list)#

2. Create the classification group.

   host1(config-policy-list)#classifier-group * precedence 200

   host1(config-policy-list-classifier-group)#

3. Add one rule that sets the EXP bits for all packets to 2, and a second rule that uses the rate-limit profile mplsRLP

   host1(config-policy-list-classifier-group)#mark-exp 2

   host1(config-policy-list-classifier-group)#rate-limit-profile mplsRLP5

4. Exit Policy List Configuration mode to save the configuration.

   host1(config-policy-list-classifier-group)#exit

   host1(config-policy-list)#exit

   host1(config)#

5. Display the policy list.

   host1#show policy-list routeForMpls
   

                                     Policy Table
                                     ------ -----
   MPLS Policy routeForMpls
      Administrative state: enable
      Reference count:      0
      Classifier control list: *, precedence 200
         mark-exp 2 mask 7
         rate-limit-profile mplsRLP5

Related Topics

• mpls policy-list

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.