address transmit-delay

Syntax

[ no ] address { ipAddress | unnumbered interfaceType interfaceSpecifier }
transmit-delay transmDelay

Release Information

Command introduced before JUNOSe Release 7.1.0.

Description

Sets the estimated time it takes to transmit a link-state update packet on the interface. The no version restores the default value.

Note: You must issue the address area command before issuing this command.

Options

• ipAddress—OSPF interface address previously specified with the address command
• unnumbered—Indicates that OSPF is running on an unnumbered interface previously specified with the address command
  • interfaceType—Interface type; see Interface Types and Specifiers
  • interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers
• transmDelay—Link-state transmit delay, a number in the range 0–3600 seconds; default value is 1 second

Mode

Router Configuration

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.