Configuring IP over a Static Ethernet Interface

To configure IP over an Ethernet interface:

1. Specify a Fast Ethernet, Gigabit Ethernet, or 10-Gigabit Ethernet port.

   host1(config)#interface fastEthernet 4/1

2. Create an IP interface.

   host1(config-if)#ip address 192.5.127.8 255.255.255.0

Figure 9 illustrates this configuration.

Figure 9: Example of IP over Ethernet Stacking Configuration Procedure

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.