[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Table of Contents
- About the Documentation
-
- E Series and JUNOSe Documentation and Release
Notes
- Audience
- E Series and JUNOSe Text and Syntax Conventions
-
- Obtaining Documentation
- Documentation Feedback
- Requesting Technical Support
- Product Overview
-
- E120 and E320 Overview
-
- System Description
- Chassis Overview
-
- E320 Model
- E120 Model
- E120 and E320 Modules
-
- SRP Module
-
- Module Details
- Nonvolatile Storage
- SFM Module
-
- Fabric Slices
- SRP IOA
-
- Module Details
- Line Modules
-
- Packet Classification
- I/O Adapters
- Network Management Tools
-
- CLI Management
- SNMP MIB Management
- Redundancy Features
-
- SRP Modules
-
- NVS Cards
- Power
- Fans
- Initial Installation
-
- Unpacking and Inspecting the Router
-
- Before You Begin
- Unpacking the Router
- Inspecting Router Components and Accessories
- If You Detect or Suspect Damage
- Contacting Juniper Networks
- The Next Step
- Installing the Router
-
- Before You Begin
- Freestanding Installation
- Rack-Mounted Installation
-
- Installation Guidelines
- Preparing the Equipment Racks
- Installing the Router
- The Next Step
- Installing Modules
-
- Overview
-
- Slot Numbering
- IOA Slot Combinations
- Module Combinations
- IOAs Requiring SFPs
- Proper Handling of ES2 4G LMs
- ES2 10G Uplink Line Modules
- Managing Modules Using the Software
- Order of Installation
- Hot-Swapping Modules
- Protecting Modules and Slots
- Required Tools and Safety Items
- Safety Guidelines
- Installing an SRP Module or SFM Module
- Installing an IOA Shelf
- Installing a Line Module or an IOA
- Removing Modules and IOAs
- Installing and Removing SFPs
-
- Installing SFPs
- Removing SFPs
- The Next Step
- Cabling the Router
-
- Cabling Overview
- Required Tools, Wires, and Cables
- Cabling the SRP IOA
-
- Network Timing Ports
- Management Ports
-
- Connecting to the Network
- Connecting to
a Console Terminal
- Cabling IOAs
-
- LC Duplex Connectors
- SFPs
- Cabling the Router for Power
-
- Task 1: Turn Off All Router Power
- Task 2: Connect the Grounding Cables
- Task 3: Connect the Power Cables
- The Next Step
- Powering Up the Router
-
- Before You Power Up the System
- Powering Up
-
- Initialization Sequence
- Status LEDs
- Powering Down
- The Next Step
- Accessing E Series Routers
-
- Setting Up Management Access
- Console Port Setup
-
- Using HyperTerminal
- Connecting Directly to the Router
- Assigning an IP Address
- Telnet Setup
- SNMP
- The Next Step
- Hardware Maintenance, Replacement, and Troubleshooting
Procedures
-
- Maintaining the Router
-
- Required Tools and Items
- Storing Modules and Components
- Cleaning the System
- Upgrading NVS Cards on SRP Modules
-
- Upgrading a System That Contains One SRP Module
- Upgrading a System That Contains Two SRP Modules
- Replacing an NVS Card
- Replacing Fan Trays
-
- Removing an E320 Fan Tray
- Installing an E320 Fan Tray
- Installing an Air Filter
- Replacing a Power Distribution Unit
- Troubleshooting
-
- Diagnosing Problems
-
- Initialization Sequence
- Troubleshooting Power Failures
- Understanding Status LEDs to Troubleshoot
-
- LED Identification
- LED Activity
- Monitoring Temperatures of Modules
- Resetting Line Modules and SRP Modules
- Double-Bit Errors on SRP Modules
-
- Detecting Double-Bit Errors
- Fixing Double-Bit Errors
- Appendixes
-
- System Specifications
-
- E120 Broadband Services Router Specifications
- E320 Broadband Services Router Specifications
- Router Power Requirements
- Installation Guidelines and Requirements
-
- Your Preinstallation Responsibilities
- Environmental Requirements
- Regulatory Compliances
- Safety Guidelines
- Equipment Rack Requirements
-
- Mechanical Requirements
- Space Requirements
- Proper Rack Installation
- Cabling Recommendations
- Product Reclamation and Recycling Program
- Hardware Compliance
-
- Federal Communications Commission (FCC) Statement
- FCC Requirements for Consumer Products
- Food and Drug Administration, Center for Devices and Radiological
Health
- Canadian Department of Communications Radio Interference Regulations
- Réglement sur le brouillage radioélectrique du
ministère des communications
- Industry Canada Notice CS-03
- Avis CS-03 d'Industrie Canada
- D.O.C. Explanatory Notes: Equipment Attachment Limitations
- Notes explicatives du ministère des Communications:
limites visant les accessoires
- EC Declaration of Conformity
- Voluntary Control Council for Interference (VCCI) Statement
for Japan
- Cable Pinouts
-
- SRP IOA
- Contacting Customer Support and Returning Hardware
-
- Contacting Customer Support
- Return Procedure
- Locating Component Serial Numbers
- Information You Might Need to Supply to JTAC
- Tools and Parts Required
- Returning
Products for Repair or Replacement
-
- Packing Instructions for Returning a
Chassis
- Declaration of Conformity
-
- Declaration of Conformity – E120 Broadband Services Router
- Declaration of Conformity – E320 Broadband Services Router
- Index
-
- Index
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
