[Contents] [Prev] [Next] [Report an Error]

cOC3/STM1 Single-Mode Intermediate Reach Module Combination

Line module label cOCx/STMx F0

I/O module label cOC3 STM1 F0 I/O
SINGLE MODE

Number of I/O ports

4

Software release

First supported: 2.2.0

Final supported: Not applicable

Description

130 W

OC3/STM1 channelized to DS3, DS1, E1, and DS0

Type

EFA ASIC

Capability

OC3/STM1

DS3, DS1

T1, E1

DS0

HDLC framing

Software features

See Channelized OCx/STMx Modules for information about the layer 2 and layer 3 protocols and applications that this module combination supports.

Model compatibility

ERX7xx models

ERX14xx models

ERX310 router

SRP module compatibility

SRP-5G+

SRP-10G

SRP-40G

SRP-40G PLUS

SRP-SE10G

Module redundancy support

1:N redundancy

NOTE: Line module redundancy is not supported on the ERX310 router.

Cables and connectors

Up to four SC full duplex connectors

Tx power:

min: –15 dBm

max: –8 dBm

Center wavelength: 1310 nm

Rx input power:

min: –31 dBm

max: –8 dBm

Rated for 15 km (9.3 miles) of 9-micron core cable

See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.

LEDs

See Module LEDs.

Alarms, errors, and events

See Monitoring Interfaces in JUNOSe Physical Layer Configuration Guide, Chapter 4, Configuring Channelized OCx/STMx Interfaces.

[Contents] [Prev] [Next] [Report an Error]

Line module label	cOCx/STMx F0
I/O module label	cOC3 STM1 F0 I/O SINGLE MODE
Number of I/O ports	4
Software release	First supported: 2.2.0 Final supported: Not applicable
Description	130 W OC3/STM1 channelized to DS3, DS1, E1, and DS0
Type	EFA ASIC
Capability	OC3/STM1 DS3, DS1 T1, E1 DS0 HDLC framing
Software features	See Channelized OCx/STMx Modules for information about the layer 2 and layer 3 protocols and applications that this module combination supports.
Model compatibility	ERX7xx models ERX14xx models ERX310 router
SRP module compatibility	SRP-5G+ SRP-10G SRP-40G SRP-40G PLUS SRP-SE10G
Module redundancy support	1:N redundancy NOTE: Line module redundancy is not supported on the ERX310 router.
Cables and connectors	Up to four SC full duplex connectors Tx power: min: –15 dBm max: –8 dBm Center wavelength: 1310 nm Rx input power: min: –31 dBm max: –8 dBm Rated for 15 km (9.3 miles) of 9-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
LEDs	See Module LEDs.
Alarms, errors, and events	See Monitoring Interfaces in JUNOSe Physical Layer Configuration Guide, Chapter 4, Configuring Channelized OCx/STMx Interfaces.