[Contents] [Prev] [Next] [Index] [Report an Error]

Monitoring Detailed Configuration Information for Specified Destinations

Purpose

Display detailed configuration information about specified destinations.

Action

To display detailed configuration information about specified destinations:

To display information about a specific destination:

host1#show l2tp destination ip 172.31.1.98 
L2TP destination 1 is Up with 5 active tunnels and 64 active sessions

      

      
To display information about all destinations:

         
host1#show l2tp destination detail 1 
L2TP destination 1 is Up with 5 active tunnels and 64 active sessions 
Configuration 
  Administrative state is enabled 
  SNMP traps are enabled 
Destination address 
  Transport ipUdp 
  Virtual router default 
  Local address 192.168.1.230, peer address 172.31.1.98 
Destination status 
  Effective administrative state is enabled 
Sub-interfaces total active failed auth-errors 
  Tunnels      5     5      0      0 
  Sessions     64    64     0      n/a 
Statistics    packets      octets       discards   errors 
  Control rx  69           3251          2          0 
  Control tx  195          23939         0          0 
  Data rx     68383456     68383456      0          0 
  Data tx     68383456     68383456       0         0 

         

      

      
Meaning

      
 Table 83 lists the show
            l2tp destination command output fields. 
      
Table 83: show l2tp
         destination Output Fields
      

      

         
            
            
         
         
            

               
Field Name

               		
               
Field Description

               		
            

         
         
            

               
Configuration

               		
               
Configured status of the destination

               		
            

            

               
Administrative state

               		
               
Administrative status of the destination:

                  
    
                     
  • enabled—No restrictions on creation and operation
                        of sessions and tunnels for this destination 
                     
    • 
                     
  • disabled—Router disabled existing sessions and tunnels
                        and will not create new sessions or tunnels for this destination
                     
    • 
                     
  • drain—Router will not create new sessions or tunnels
                        for this destination
                     
    • 
                  

               		
            

            

               
SNMP traps

               		
               
Whether or not the router sends traps to SNMP for operational
                     state changes
                  

               		
            

            

               
Destination address

               		
               
Address information for the specified destination

               		
            

            

               
Transport

               		
               
Method used to transfer traffic

               		
            

            

               
Virtual

               		
               
Name of the virtual router on which the tunnel is configured

               		
            

            

               
Local and peer addresses

               		
               
Addresses of the local and remote interfaces

               		
            

            

               
Destination status

               		
               
Effective administrative state—The more restrictive
                     of the router and destination administrative states. This setting,
                     rather than the administrative state of the destination, determines
                     whether the router can create new sessions or tunnels and whether
                     the sessions or tunnels are disabled for this destination.
                  

               		
            

            

               
Sub-interfaces

               		
               
Sub-interface information about the L2TP destination

               		
            

            

               
total

               		
               
Number of sessions or tunnels that the router created
                     for this destination
                  

               		
            

            

               
active

               		
               
Number of operational sessions or tunnels for this destination

               		
            

            

               
failed

               		
               
Number of requests that did not reach an operational
                     state for this destination
                  

               		
            

            

               
auth-errors

               		
               
Number of requests that failed because the tunnel password
                     was invalid for this destination
                  

               		
            

            

               
Statistics

               		
               
Information about the traffic sent and received

               		
            

         
      

      
Related Topics

      
      

      [Contents]
      [Prev]
      [Next]
      
      [Index]
      
      [Report an Error]
      


         

            

               
               Copyright © 2009, Juniper Networks, Inc.
                  All rights reserved.
                  	Trademark Notice.