[Contents] [Prev] [Next] [Index] [Report an Error]

Operations in Boot Mode

To access Boot mode:

  1. Reload the system from Privileged Exec mode:
    host1#reload
    WARNING: Execution of this command will cause the system to reboot.
    Proceed with reload? [confirm]
    Reload operation commencing, please wait...
    7
  2. Press the <mb > key sequence (case-insensitive) during the countdown that is displayed immediately after the BPOST tests are bypassed. This puts the CLI in Boot mode.
    :boot##

    If you do not press the <mb> key sequence before the countdown timer expires, the reloading process continues and returns the CLI to the normal User Exec mode.

[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.