Symbols
- 10-Gigabit Ethernet interfaces 1
- for E120 and E320 routers 1
- 10-Gigabit Ethernet modules 1
- specifying an interface 1
- 802.3ad link aggregation 1
- E120 and E320 routers 1
A
- AAA (authentication, authorization, accounting) 1
- sending ATM interface descriptions to 1
- aaa commands 1
- aaa domain-map 1
- aaa tunnel calling-number-format 1
- aaa tunnel calling-number-format fallback 1
- AAL (ATM Adaptation Layer) 1
- AAL5 encapsulation types 1
- AC-Cookie tag, PPPoE 1
- AC-Name tag, PPPoE 1
- accounting statistics 1
- terminated PPP session 1
- address ranges 1
- VPI/VCI 1
- agent-circuit-identifier and dynamic VLAN subinterfaces 1
- aggregating T1 or E1 lines 1
- aggregation, Ethernet link 1
- AIS (alarm indication signal) cells 1
- alarm indication signal cells. 1, See AIS cells
- ARP (Address Resolution Protocol) table 1
- arp commands 1
- arp 1
- ARP, Inverse 1
- Asynchronous Transfer Mode. 1, See ATM
- ATM (Asynchronous Transfer Mode) 1
- AAL 1
- AIS cells, handling 1
- ATM passthrough 1
- cable lengths 1
- CAC 1
- CC cells 1
- cell scrambling payload 1
- configuring 1
- dynamic interfaces 1
- E120 and E320 routers 1
- E320 routers 1
- fault management 1
- ILMI 1
- interface description 1
- loopback cells, handling 1
- Martini encapsulation 1
- module capabilities (statistics) 1
- monitoring 1
- OAM 1
- oversubscription for dynamic interfaces 1
- overview 1
- ping 1
- configuring 1
- overview 1
- platform considerations 1
- PVCs 1
- configuring 1
- configuring individual parameters for 1
- defining 1
- RDI cells, handling 1
- testing 1
- VC classes 1
- VC integrity 1
- VCC-layer connectivity verification 1
See also- ATM 1483 subinterfaces, dynamic 1
- assigning VC classes to 1
- benefits of using 1
- bulk configuration of VC ranges 1
- changing VC subranges 1
- configuring 1
- creating static ATM interfaces inVC subranges 1
- exporting descriptions 1
- monitoring 1
- overriding base profile assignments 1
- oversubscription 1
- overview 1
- profiles for 1
- restarting LCP negotiations for PPPoA clients 1
- atm aal5 commands 1
- atm aal5 description 1
- atm aal5 shutdown 1
- atm aal5 snmp link-status 1
- ATM Adaptation Layer. 1, See AAL
- atm atm1483 commands 1
- atm atm1483 advisory-rx-speed 1
- atm atm1483 auto-configure 1
- atm atm1483 description 1
- atm atm1483 export-subinterface-description 1
- atm atm1483 mtu 1
- atm atm1483 profile 1
- atm atm1483 shutdown 1
- atm atm1483 snmp trap link-status 1
- atm atm1483 subscriber 1
- atm commands 1
- atm auto-configuration 1
- atm bulk-config 1
- atm bulk-config modify 1
- atm bulk-config shutdown 1
- atm cac 1
- atm class-vc 1
- atm clock internal 1
- atm description 1
- atm framing 1
- atm ilmi-enable 1
- atm ilmi-keepalive 1
- atm lbo 1
- atm oam 1
- atm oam flush 1
- atm oam loopback-location 1
- atm pvc 1
- atm shutdown 1
- atm snmp trap link-status 1
- atm sonet 1
- atm sonet stm-1 1
- atm uni-version 1
- atm vc-per-vp 1
- atm vp-description 1
- atm vp-tunnel 1
- monitor atm vc 1
- monitor atm vp 1
- ping atm interface atm 1
See also- ATM VC Configuration mode 1
- ATM virtual circuit (VC) 1
- authentication 1
- EAP 1
- MLPPP 1
- PPP 1
- subscribers on dynamic bridged Ethernet interfaces 1
- auto-configure commands 1
- auto-configure 1
- auto-configure atm1483 1
- auto-configure vlan 1
- autodetection of dynamic interfaces 1
B
- B-RAS applications, with PPP sessions 1
- bandwidth 1
- SONET/SDH 1
- base profiles 1
- VLAN subinterfaces 1
- baseline commands 1
- baseline atm 1
- baseline atm vp interface 1
- baseline bridge 1
- baseline bridge interface 1
- baseline frame-relay 1
- baseline frame-relay interface 1
- baseline frame-relay multilinkinterface 1
- baseline hdlc interface serial 1
- baseline interface atm 1
- baseline interface pos 1
- baseline ppp (MLPPP) 1
- baseline ppp interface 1
- baseline pppoe interface 1
- bridge commands 1
- bridge 1
- bridge acquire 1
- bridge address 1
- bridge aging time 1
- bridge crb 1
- bridge learn 1
- bridge route 1
- bridge snmp-trap link-status 1
- bridge subscriber-policy 1
- bridge-group 1
See also- bridge groups 1
- configuring optional attributes 1
- creating 1
- defined 1
- monitoring 1
- bridge interfaces 1
- configuring 1
- defined 1
- monitoring 1
- supported configurations 1
- types of 1
- bridge1483 commands 1
- bridge1483 mtu 1
- bridge1483 service-profile 1
- bridged Ethernet dynamic interfaces 1
- authenticating subscribers 1
- profile characteristics 1
- bridged Ethernet static interfaces 1
- application 1
- backward compatible configuration 1
- configuring 1
- configuring for terminated traffic 1
- configuring MTU size 1
- configuring S-VLANs 1
- configuring VLANs 1
- E120 and E320 routers 1
- MAC address validation 1
- monitoring 1
- platform considerations 1
- terminating and routing traffic 1
- VLAN and S-VLAN support 1
- bridged IP 1
- configuring 1
- E120 and E320 routers 1
- overview 1
- platform considerations 1
- bridging, transparent 1
- concurrent routing and bridging 1
- configuration examples 1
- bridged Ethernet 1
- VLANs 1
- configuration tasks 1
- configuring 1
- bridge groups and bridge interfaces 1
- optional bridge group attributes 1
- routing 1
- subscriber policies 1
- creating bridge groups 1
- E120 and E320 routers 1
- MAC addresses 1
- monitoring 1
- overview 1
- platform considerations 1
- prerequisites 1
- references 1
- setting statistics baselines 1
- subscriber policies 1
- unsupported features 1
- broadcast command 1
- bulk configuration of VC ranges 1
- assigning VC classes 1
- oversubscription 1
- restarting LCP negotiations for PPPoA clients 1
- with CAC 1
- bulk configuration of VLAN ranges 1
- bundle 1
- MLFR 1
- MLPPP 1
C
- cable length 1
- ATM interfaces 1
- CAC (connection admission control) for ATM 1
- configuring 1
- overview 1
- with bulk configuration 1
- Calling Number AVP 1
- descriptive format configuration 1
- format configuration with agent ID suboptions 1
- cbr command 1
- CE-side load balancing 1
- CE1 line modules 1
- MLPPP features 1
- cells 1
- AIS 1
- ATM 1
- F4 OAM 1
- fault management 1
- handling of ATM loopback 1
- loopback 1
- RDI 1
- Challenge Handshake Authentication Protocol. 1, See CHAP
- channelized T1 interfaces 1
- MLPPP features 1
- channelized T3 interfaces 1
- end-to-end fragmentation and reassembly 1
- MLPPP features 1
- CHAP (Challenge Handshake Authentication Protocol) 1
- circuit ID, capturing for PPPoE 1
- configuring 1
- dsl-forum-1 format and examples 1
- formatting 1
- monitoring 1
- overview 1
- sending to RADIUS or L2TP 1
- troubleshooting 1
- using in profiles 1
- Cisco HDLC 1
- configuring 1
- E120 and E320 routers 1
- error frames 1
- framing 1
- line modules supported 1
- monitoring 1
- overview 1
- platform considerations 1
- shutting down the interface 1
- SLARP Address Resolution protocol 1
- SLARP Keep-Alive protocol 1
- SLARP keepalive interval 1
- class-int command 1
- class-vc command 1
- classes, VC 1
- assigning to 1
- ATM major interfaces 1
- dynamic ATM 1483 subinterfaces 1
- PVCs 1
- static ATM 1483 subinterfaces 1
- benefits 1
- configuring 1
- examples 1
- configuration 1
- precedence levels 1
- monitoring 1
- overview 1
- precedence levels 1
- upgrade considerations 1
- clear bridge commands 1
- clear bridge 1
- clear bridge address 1
- clear bridge interface 1
- clock commands 1
- clock source 1
- POS interfaces 1
- clock source, selecting 1
- ATM interfaces 1
- POS interfaces 1
- COCX-F3 line modules 1
- MLPPP features 1
- cOCx/STMx interfaces 1
- end-to-end fragmentation and reassembly 1
- MLPPP features 1
- concurrent routing and bridging. 1, See CRB
- configuration examples 1
- ATM 1483 subinterfaces, dynamic 1
- ATM VC classes 1
- bridged Ethernet, dynamic 1
- bridged Ethernet, static 1
- Cisco HDLC 1
- IPoA, dynamic 1
- MLFR 1
- MLPPP, dynamic 1
- MLPPP, static 1
- PPPoE, dynamic 1
- PPPoE, static 1
- profiles for dynamic interfaces 1
- transparent bridging 1
- VLAN subinterfaces, dynamic 1
- configure file command 1
- configuring. 1, See specific feature, product, or protocol
- connection admission control. 1, See CAC for ATM
- connection types, ATM 1
- multipoint 1
- point-to-point 1
- control PVCs, creating 1
- conventions 1
- notice icons 1
- text and syntax 1
- CRB (concurrent routing and bridging) 1
- bridge crb command 1
- bridge route command 1
- configuring routing 1
- defined 1
- enabling 1
- crc command 1
- creating an IP profile 1
- tcp adjust-mss 1
- CT3/T3-F0 line modules 1
- MLPPP features 1
- customer support 1
- contacting JTAC 1
D
- data communication equipment. 1, See DCE
- data PVCs, creating 1
- data terminal equipment. 1, See DTE
- data-link connection identifier. 1, See DLCI
- DCE (data communication equipment) 1
- configuring Frame Relay interface as 1
- frame-relay lmi commands 1
- show frame-relay lmi command 1
- debugging PPP and PPPoE dynamic interfaces 1
- description, interface 1
- ATM 1483 subinterfaces, exporting 1
- ATM interfaces 1
- ATM virtual paths 1
- Frame Relay interfaces 1
- POS interfaces 1
- sending to AAA 1
- serial interfaces 1
- DHCP option 82 field 1
- DHCP relay 1
- with bridged IP 1
- digital subscriber line access multiplexers. 1, See DSLAMs
- Discovery protocol with PPPoE 1
- DLCI (data-link connection identifier) 1
- documentation set 1
- comments on 1
- ds3-scramble command 1
- dsl-forum-1 format for PPPoE remote circuit ID 1
- DSLAMs (digital subscriber line access multiplexers) 1
- DTE (data terminal equipment) 1
- configuring Frame Relay interface as 1
- frame-relay lmi command 1
- show frame-relay lmi command 1
- dynamic encapsulation type lockout 1
- benefits 1
- configuring 1
- for PPPoE clients 1
- clearing lockout condition 1
- configuring 1
- differences from PPPoE over static ATM 1
- monitoring 1
- grace period 1
- guidelines 1
- Dynamic Host Configuration Protocol. 1, See DHCP relay
- dynamic interfaces 1
- ATM 1483 subinterfaces 1
- autodetection 1
- bridged Ethernet 1
- authenticating subscribers 1
- configuring from a profile 1
- configuring from RADIUS 1
- configuring IPoA 1
- configuring PPP and PPPoE over ATM 1
- restarting LCP negotiations 1
- configuring PPPoE over static PPPoE 1
- ATM interface columns 1
- encapsulation type lockout 1
- Ethernet and S-VLAN interface columns 1
- Ethernet and VLAN interface columns 1
- S-VLAN oversubscription 1
- static Ethernet interface columns 1
- E120 and E320 routers 1
- E320 routers 1
- inserting dynamic IP routes intorouting table 1
- monitoring 1
- oversubscription, ATM 1
- overview 1
- platform considerations 1
- profiles, reassigning 1
- RADIUS authentication 1
- troubleshooting 1
- types supported 1
- VLAN subinterfaces 1
- VLAN subinterfaces with agent-circuit-identifier information 1
E
- E120 and E320 routers 1
- 10-Gigabit Ethernet interfaces 1
- 802.3ad link aggregation 1
- ATM interfaces 1
- bridged IP interfaces 1
- Cisco HDLC interfaces 1
- dynamic interfaces 1
- Gigabit Ethernet interfaces 1
- POS interfaces 1
- PPP interfaces 1
- PPPoE interfaces 1
- transparent bridging 1
- e3-scramble command 1
- E320 routers 1
- ATM interfaces 1
- bridged Ethernet 1
- dynamic interfaces 1
- POS interfaces 1
- PPP interfaces 1
- EAP (Extensible Authentication Protocol) 1
- authentication methods 1
- authentication negotiation 1
- components 1
- L2TP 1
- limitations 1
- MRU 1
- MTU 1
- performance 1
- retransmission of packets 1
- scalability 1
- types 1
- ECMP (equal-cost multipath) 1
- MLFR alternative to 1
- MLPPP alternative to 1
- enable commands 1
- enable 1
- enabling LMI 1
- encapsulation commands 1
- encapsulation 1
- encapsulation bridge1483 1
- encapsulation frame-relay ietf 1
- encapsulation hdlc 1
- encapsulation mlframe-relay ietf 1
- encapsulation mlppp 1
- encapsulation ppp 1
- encapsulation pppoe 1
- encapsulation vlan 1
- encapsulation method 1
- ATM interface 1
- Cisco HDLC interface 1
- Frame Relay interface 1
- encapsulation type lockout. 1, See dynamic encapsulation type lockout
- encapsulation, configuring for PVCs 1
- end-to-end fragmentation and reassembly, Frame Relay 1
- endpoint discriminator 1
- MLPPP 1
- equal-cost multipath. 1, See ECMP
- error frames 1
- Frame Relay 1
- PPP 1
- ES2-S1 Service IOA 1
- MLPPP features 1
- Ethernet interfaces 1
- CE-side load balancing 1
- commands 1
- interface fastEthernet 1
- interface lag 1
See also- IEEE 802.1Q 1
- IEEE 802.3ad 1
- L2TP 1
- link aggregation (LAG) 1
- monitoring 1
- MPLS 1
- multinetting 1
- PPPoE over S-VLANs 1
- PPPoE over VLANs 1
- S-VLANs 1
- subnetwork attachment point (SNAP) 1
- VLANs 1
- Ethernet link aggregation 1
- CE-side load balancing 1
- configuring 1
- enabling CE-side load balancing 1
- IP interfaces 1
- example 1
- MPLS 1
- MPLS over VLAN 1
- overview 1
- PPPoE subinterfaces 1
- example 1
- VLAN subinterfaces 1
- example 1
- Ethernet link aggregation commands 1
- interface lag 1
- lacp 1
- lacp port-priority 1
- member-interface 1
- minimum-links 1
- pppoe subinterface lag 1
- Ethernet link redundancy 1
- configuration models 1
- configuring 1
- link behavior 1
- overview 1
- Ethernet link redundancy commands 1
- redundant-port 1
- redundant-port force-failover 1
- Ethertype value, assigning to S-VLANs 1
- example 1
- examples, configuration 1
- ATM 1483 subinterfaces, dynamic 1
- ATM VC classes 1
- bridged Ethernet, dynamic 1
- bridged Ethernet, static 1
- Cisco HDLC 1
- IPoA, dynamic 1
- MLFR 1
- MLPPP, dynamic 1
- MLPPP, static 1
- PPPoE, dynamic 1
- PPPoE, static 1
- profiles for dynamic interfaces 1
- transparent bridging 1
- VLAN subinterfaces, dynamic 1
- exporting ATM 1483 subinterface descriptions 1
- Extensible Authentication Protocol. 1, See EAP
- external loopback 1
F
- F4 OAM cells, for ATM 1
- configuring 1
- handling of received cells 1
- F5 OAM cells, for ATM 1
- configuring 1
- disabling automatically 1
- handling of received cells 1
- Fast Ethernet interfaces 1
- specifying an interface 1
- Fast Ethernet modules 1
- configuring PPPoE 1
- specifying an interface 1
- fault management, ATM 1
- flush, ATM OAM 1
- fragmentation 1
- Frame Relay packets 1
- MLPPP 1
- configuring dynamic 1
- configuring static 1
- overview 1
- Frame Relay 1
- configuring 1
- disabling interface 1
- end-to-end fragmentation and reassembly 1
- configuring 1
- error frames 1
- framing 1
- interconnection and relationship of NNIs and subnetworks 1
- map class 1
- maximum payload size 1
- monitoring 1
- multicast addressing 1
- Network-to-Network Interface 1
- overview 1
- platform considerations 1
- SNMP link status processing 1
- unicast addressing 1
- User-to-Network Interface 1
- frame-relay commands 1
- frame-relay class 1
- frame-relay description 1
- frame-relay fragment 1
- frame-relay interface-dlci ietf 1
- frame-relay intf-type 1
- frame-relay keepalive 1
- frame-relay lmi-n391dte 1
- frame-relay lmi-n392dce 1
- frame-relay lmi-n392dte 1
- frame-relay lmi-n393dce 1
- frame-relay lmi-n393dte 1
- frame-relay lmi-t391dte 1
- frame-relay lmi-t392dce 1
- frame-relay lmi-type 1
- map-class frame-relay 1
See also- framing 1
- ATM interfaces 1
- capabilities of E-series routers 1
- POS interfaces 1
G
- Gigabit Ethernet interfaces for E120 and E320 routers 1
- Gigabit Ethernet modules 1
- configuring MLPPP 1
- configuring PPPoE 1
- specifying an interface 1
- grace period, dynamic encapsulation type lockout 1
- group (multicast) addressing 1
- groups, bridge. 1, See bridge groups
H
- hash-based packet distribution with MLPPP 1
- HDLC (High-Level Data Link Control), Cisco. 1, See Cisco HDLC
- HDLC (High-Speed Data Link Control) 1
- PPP framing 1
- serial encapsulation 1
- hdlc commands 1
- hdlc down-when-looped 1
- hdlc keepalive 1
- hdlc shutdown 1
- high availability 1
- and atm atm1483 subscriber command 1
- and subscriber command 1
- High-Level Data Link Control. 1, See Cisco HDLC
- High-Speed Data Link Control. 1, See HDLC
- higher-level protocols over Ethernet 1
- platform considerations 1
I
- IEEE 802.1Q 1
- IEEE 802.1w 1
- IEEE 802.1w (Rapid Reconfiguration of Spanning Tree) 1
- IEEE 802.3ad 1
- IEEE 802.3ad (Link Aggregation) 1
- ILMI 1
- ILMI (integrated local management interface) 1
- about 1
- enabling 1
- keepalive timer 1
- inarp command 1
- individual (unicast) addressing 1
- integrated local management interface. 1, See ILMI
- interface commands 1
- interface atm 1
- interface fastEthernet 1
- interface gigabitEthernet 1
- interface lag 1
- interface mlframe-relay 1
- interface mlppp 1
- interface pos 1
- interface serial 1
- Cisco HDLC interfaces 1
- Frame Relay interfaces 1
- PPPoE interfaces 1
- interface tenGigabitEthernet 1
- interface description 1
- Frame Relay interfaces 1
- POS interfaces 1
- serial interfaces 1
- interfaces 1
- 10-Gigabit Ethernet 1
- bridge. 1, See bridge interfaces
- Fast Ethernet 1
- Gigabit Ethernet 1
- serial. 1, See serial interfaces
- interfaces, monitoring 1
- Ethernet 1
- internal loopback 1
- International Telecommunication Union. 1, See ITU
- Internet Protocol Control Protocol. 1, See IPCP
- Inverse ARP 1
- IP addresses 1
- assigning to Cisco HDLC interfaces 1
- assigning to Frame Relay subinterfaces 1
- assigning to PPP interface 1
- PPPoE interfaces 1
- ip commands 1
- ip (subscriber policies) 1
- ip access-routes 1
- ip address 1
- ip auto-configure ip-subscriber 1
- ip auto-detect ip-subscriber 1
- ip directed-broadcast 1
- ip filter-options all 1
- ip igmp 1
- ip ignore-df-bit 1
- ip inactivity-timer 1
- ip mac-validate 1
- ip mtu 1
- ip nat 1
- ip policy 1
- ip redirects 1
- ip route-map ip-subscriber 1
- ip sa-validate 1
- ip tcp adjust-mss 1
- ip unnumbered 1
- ip virtual-router 1
- IP over ATM. 1, See IPoA
- IP over VLAN over bridged Ethernet 1
- IP profile 1
- IP routes, inserting dynamic routes intorouting table 1
- IPCP (Internet Protocol Control Protocol) 1
- option 0x90 1
- overview 1
- IPoA (IP over ATM) 1
- configuring dynamic interfaces 1
- dynamic interfaces 1
- IPv6 1
- neighbor discovery, defining 1
- ipv6 commands 1
- ipv6 address 1
- ipv6 mld 1
- ipv6 mtu 1
- ipv6 nd 1
- ipv6 nd managed-config-flag 1
- ipv6 nd other-config-flag 1
- ipv6 nd prefix-advertisement 1
- ipv6 nd ra-interval 1
- ipv6 nd reachable-time 1
- ipv6 nd suppress-ra 1
- ipv6 policy 1
- ipv6 sa-validate 1
- ipv6 unnumbered 1
- ipv6 virtual-router 1
- IPv6 neighbor discovery commands 1
- ipv6 nd reachable-time 1
- IPv6 profile 1
- ITU (International Telecommunication Union) recommendation, ATM OAM standards 1
J
- J-Flow commands 1
- ip route-cache flow sampled 1
K
- keepalive timer, setting 1
L
- L2TP (Layer 2 Tunneling Protocol) 1
- profile characteristics 1
- using PPPoE remote circuit ID 1
- l2tp commands 1
- l2tp policy 1
- L2TP Proxy Authenticate Extensions for EAP—draft-ietf-l2tpext-proxy-authen-ext-eap-01.txt (December 2006 expiration) 1
- LACP (Link Aggregation Control Protocol) 1
- PPPoE subinterfaces 1
- redundant member link behavior 1
- layer 2 services over MPLS 1
- 802.3ad link aggregation 1
- 802.3ad switch 1
- Layer 2 Tunneling Protocol. 1, See L2TP
- LCP (Link Control Protocol) 1
- configuration options 1
- endpoint discriminator 1
- MRRU 1
- SSN header format 1
- restarting negotiations for PPPoA clients 1
- Link Control Protocol. 1, See LCP
- Link Integrity Protocol. 1, See LIP
- LIP (Link Integrity Protocol) 1
- LMI (local management interface) 1
- configuring counters and timers 1
- configuring type 1
- enabling 1
- monitoring 1
- load-interval command 1
- ATM interfaces 1
- POS interfaces 1
- local management interface. 1, See LMI;ILMI
- lockout, encapsulation type. 1, See dynamic encapsulation type lockout
- log severity debug command 1
- loopback 1
- detection on Cisco HDLC interfaces 1
- loopback command 1
- ATM interfaces 1
- POS interfaces 1
- loopback for ATM VC integrity 1
- cells 1
- configuring 1
- F4 OAM cells 1
- handling of received cells 1
M
- MAC (media access control) addresses 1
- bridging overview 1
- configuring for S-VLANs 1
- configuring for VLANs 1
- removing from forwarding table 1
- using with bridged Ethernet 1
- validation on bridged Ethernet interfaces 1
- macro command 1
- macros 1
- using to configure dynamic interfaces 1
- magic numbers 1
- manuals 1
- comments on 1
- map class, Frame Relay fragmentation 1
- map entries, Frame Relay 1
- map list, using to configure NBMA interfaces 1
- map-class frame-relay command 1
- map-group command 1
- map-list command 1
- maximum payload size, Frame Relayfragmentation 1
- maximum receive unit. 1, See MRU
- media access control addresses 1, See MAC addresses
- member-interface command 1
- message of the minute messages. 1, See MOTM messages
- MFR 1
- aggregating OC3/STM1 lines 1
- MLFR (Multilink Frame Relay) 1
- aggregating T1 or E1 lines 1
- aggregation limits 1
- bundle 1
- bundle limits 1
- configuring 1
- interfaces, monitoring 1
- Link Integrity Protocol 1
- member link sequence numbers 1
- NxT1 service 1
- overview 1
- packet distribution, round-robin 1
- platform considerations 1
- protocol layering 1
- unsupported features 1
- MLP. 1, See MLPPP
- MLPPP (Multilink PPP) 1
- aggregating T1 or E1 lines 1
- aggregation limits 1
- authentication 1
- bundle 1
- bundle limits 1
- bundle name and RADIUS 1
- commands, contextual differences of 1
- configuring 1
- ECMP 1
- encapsulation 1
- endpoint discriminator 1
- features 1
- fragmentation 1
- configuring dynamic 1
- configuring static 1
- overview 1
- interface stacking 1
- interfaces, monitoring 1
- member link sequence numbers 1
- MRRU 1
- NxT1 service 1
- overview 1
- packet distribution 1
- platform considerations 1
- profiles 1
- protocol layering 1
- reassembly 1
- configuring dynamic 1
- configuring static 1
- overview 1
- SSN header format 1
- statistics and baselining 1
- unsupported features 1
See also- modules 1
- ATM capabilities 1
- monitor commands 1
- monitor atm vc 1
- monitor atm vp 1
- monitor vlan interface 1
- monitoring. 1, See specific feature, product, or protocol
- MOTM (message of the minute) messages 1
- MP. 1, See MLPPP
- MPLS (Multiprotocol Label Switching) 1
- configuring over Ethernet link aggregation 1
- configuring S-VLAN tunnels 1
- mpls commands 1
- mpls 1
- mpls (subscriber policies) 1
- mpls atm vci range 1
- mpls-relay 1
- MPLS over VLAN over bridged Ethernet 1
- MRRU LCP configuration option 1
- MRU (maximum receive unit) 1
- POS interfaces 1
- PPP interfaces 1
- mru command 1
- MTU (maximum transmission unit) 1, See MTU
- bridged Ethernet interfaces 1
- Ethernet interfaces 1
- POS interfaces 1
- mtu command 1
- Ethernet interfaces 1
- multicast addressing 1
- multicast command 1
- Multilink Frame Relay. 1, See MLFR
- multilink maximum received reconstructed unit (MRRU) 1
- Multilink PPP. 1, See MLPPP
- multinetting 1
- multipoint, ATM connections 1
N
- NBMA 1
- NBMA (nonbroadcast multiaccess) 1
- configuring 1
- description 1
- Inverse ARP 1
- point-to-multipoint 1
- removing circuits 1
- static mapping 1
- nested profile assignments 1
- VLAN subinterfaces 1
- NNI (Network-to-Network Interface),Frame Relay 1
- nonbroadcast multiaccess. 1, See NBMA
- notice icons 1
- NxT1 service 1
- MLFR 1
- MLPPP 1
O
- OAM (Operation, Administration, and Management), ATM 1
- cc (continuity check) cells 1
- configuring 1
- disabling F5 OAM services 1
- flush 1
- standards 1
- oam commands 1
- oam ais-rdi 1
- oam cc 1
- oam retry 1
- oam-pvc 1
- OC3 modules 1
- monitoring ATM interfaces 1
- testing ATM interfaces 1
- OCx/STMx interfaces 1
- MLPPP features 1
- Operation, Administration, and Management. 1, See OAM, ATM
- option 82 field, DHCP 1
- OSI Network Layer Control Protocol. 1, See OSINLCP
- OSINLCP (OSI Network Layer Control Protocol) 1
- overriding base profile assignments 1
- assigning to PVC 1
- monitoring 1
- overview 1
- removing from PVC 1
- removing from VC range or subrange 1
- removing from VLAN range or subrange 1
- removing from VLAN subinterface 1
- VLANs 1
- oversubscription 1
- dynamic ATM interfaces 1
- S-VLANs 1
P
- packet logging, PPP and PPPoE 1
- packet over SONET. 1, See POS
- PADM (PPPoE Active Discovery Message), configuring 1
- PADN (PPPoE Active Discovery Network) messages, configuring 1
- padn command 1
- PADS (PPPoE Active Discovery Session) packets, configuring 1
- PAP (Password Authentication Protocol) 1
- Password Authentication Protocol. 1, See PAP
- payload, ATM cell 1
- PCR (peak cell rate) 1
- permanent virtual circuit. 1, See PVC
- ping atm interface atm command 1
- ping, ATM 1
- configuring 1
- overview 1
- platform considerations 1
- ATM 1
- bridged Ethernet 1
- bridged IP 1
- Cisco HDLC 1
- dynamic interfaces 1
- Ethernet interfaces 1
- Frame Relay 1
- higher-level protocols over Ethernet 1
- MLFR 1
- MLPPP 1
- POS 1
- PPP 1
- PPPoE 1
- transparent bridging 1
- point-to-multipoint, NBMA connection 1
- Point-to-Point Protocol over ATM. 1, See PPPoA
- Point-to-Point Protocol over Ethernet. 1, See PPPoE
- Point-to-Point Protocol. 1, See PPP
- policies, subscriber. 1, See subscriber policies for transparent bridging
- policy commands 1
- atm policy 1
- frame-relay policy 1
- gre-tunnel policy 1
- ip policy 1
- l2tp policy 1
- mpls policy 1
- vlan policy 1
- policy management 1
- baselining statistics 1
- preserving statistics 1
- statistics 1
- POS (packet over SONET) 1
- configuring interface 1
- disabling interface 1
- E120 and E320 routers 1
- E320 routers 1
- line modules supported 1
- monitoring interface 1
- overview 1
- platform considerations 1
- references 1
- pos commands 1
- pos description 1
- pos framing 1
- pos scramble-atm 1
- PPP (Point-to-Point Protocol) 1
- accounting statistics for terminated sessions 1
- Async-Control-Character-Map (ACCM) option 1
- authentication 1
- configuring 1
- configuring dynamic interfaces 1
- E120 and E320 routers 1
- E320 routers 1
- EAP 1
- Extensible Authentication Protocol 1
- interfaces 1
- magic numbers 1
- monitoring interfaces 1
- network control protocol 1
- packet logging 1
- platform considerations 1
- PPP profiles 1
- troubleshooting 1
- dynamic interfaces 1
- static interfaces 1
- ppp commands 1
- ppp aaa-profile 1
- ppp authentication 1
- ppp chap-challenge-length 1
- ppp description 1
- ppp fragmentation 1
- ppp hash-link-selection (MLPPP) 1
- ppp initiate-ip 1
- ppp initiate-ipv6 1
- ppp ipcp netmask 1
- ppp keepalive 1
- ppp keepalive (MLPPP) 1
- ppp log 1
- ppp log (MLPPP) 1
- ppp magic-number disable 1
- ppp magic-number disable (MLPPP) 1
- ppp magic-number ignore-mismatch 1
- ppp max-bad-auth 1
- ppp max-bad-auth (MLPPP) 1
- ppp max-negotiations 1
- ppp mru 1
- ppp multilink enable (MLPPP) 1
- ppp passive-mode 1
- ppp passive-mode (MLPPP) 1
- ppp peer 1
- ppp peer (MLPPP) 1
- ppp reassembly 1
- ppp shutdown 1
- ppp shutdown (MLPPP) 1
- ppp shutdown ip 1
- ppp shutdown mpls 1
- ppp shutdown osi 1
See also- PPP Multilink. 1, See MLPPP
- PPPoA (Point-to-Point Protocol over ATM) 1
- terminating stale subscribers and restarting LCP negotiations 1
- PPPoE 1
- PPPoE (Point-to-Point Protocol over Ethernet) 1
- Active Discovery Initiation (PADI) packets 1
- Active Discovery Message (PADM) 1
- Active Discovery Network (PADN) messages 1
- Active Discovery Offer (PADO) packets 1
- Active Discovery Request (PADR) packets 1
- Active Discovery Session (PADS) packets 1
- agent-circuit-identifier information 1
- capturing remote circuit ID 1
- configuring 1
- dsl-forum-1 format and examples 1
- formatting 1
- monitoring 1
- overview 1
- sending to RADIUS or L2TP 1
- troubleshooting 1
- using in profiles 1
- configuring dynamic interfaces over ATM 1
- configuring dynamic interfaces over PPPoE 1
- configuring for Ethernet 1
- configuring over ATM 1
- Discovery protocol 1
- DSL Forum VSA 26-1 1
- dynamic encapsulation type lockout 1
- clearing lockout condition 1
- configuring 1
- differences from PPPoE over static ATM 1
- monitoring 1
- E120 and E320 routers 1
- monitoring interfaces 1
- overview 1
- packet logging 1
- platform considerations 1
- subinterfaces for LACP 1
- troubleshooting 1
- dynamic interfaces 1
- static interfaces 1
- pppoe commands 1
- encapsulation pppoe 1
- pppoe 1
- pppoe (subscriber policies) 1
- pppoe acname 1
- pppoe always-offer 1
- pppoe auto-configure 1
- pppoe auto-configure lockout-time 1
- pppoe clear lockout interface 1
- pppoe duplicate-protection 1
- pppoe log pppoeControlPacket 1
- pppoe motm 1
- pppoe pads disable-ac-info 1
- pppoe profile 1
- pppoe remote-circuit-id 1
- pppoe service-name-table 1
- pppoe sessions 1
- pppoe subinterface 1
- pppoe subinterface fastEthernet 1
- pppoe subinterface gigabitEthernet 1
- pppoe subinterface lag 1
- pppoe subinterface tenGigabitEthernet 1
- pppoe url 1
- service 1
See also- PPPoE over S-VLAN over bridged Ethernet 1
- PPPoE over VLAN over bridged Ethernet 1
- PPPoE service name tables 1
- action, defined 1
- configuring 1
- creating and populating 1
- enabling for dynamic interfaces 1
- enabling for static interfaces 1
- Ethernet configurations 1
- overview 1
- service name tag, defined 1
- precedence levels for VC classes 1
- examples 1
- overview 1
- privilege level 1
- for troubleshooting dynamic interfaces 1
- profile commands 1
- profile 1
- profile atm1483 bulk-config-name 1
- profile atm1483 bulk-config-name pvc 1
- profile vlan bulk-config 1
- profile vlan override 1
- profile-reassign 1
- vlan profile 1
- vlan service-profile 1
See also- profiles 1
- assigning to a static interface 1
- assigning to an interface 1
- characteristics for 1
- creating for debugging 1
- description 1
- for dynamic ATM 1483 subinterfaces 1
- for dynamic VLAN subinterfaces 1
- monitoring 1
- overriding base profile assignments 1
- reassigning for troubleshooting 1
- using to configure dynamic interfaces 1
- working with 1
- proxy ARP 1
- PVC (permanent virtual circuit) 1
- assigning VC classes 1
- ATM interfaces 1
- bulk configuration of 1
- configuring encapsulation 1
- configuring F5 OAM 1
- configuring for bridged IP 1
- configuring individual parameters for 1
- configuring Inverse ARP 1
- configuring service category 1
- creating control PVCs 1
- creating data PVCs 1
- Frame Relay 1
- overview 1
- pvc command 1
- for control PVCs 1
- for data PVCs 1
R
- RADIUS (Remote Authentication Dial-In User Service) 1
- authentication of dynamic interfaces 1
- configuring dynamic interfaces from 1
- MLPPP Bundle Name VSA 1
- overriding attributes for PPPoE 1
- using PPPoE remote circuit ID 1
- radius commands 1
- radius override calling-station-idremote-circuit-id 1
- radius override nas-port-id remote-circuit-id 1
- radius remote-circuit-id-delimiter 1
- radius remote-circuit-id-format 1
- radius remote-circuit-id-format (dsl-forum-1 keyword) 1
- ranges, VC. 1, See VC ranges, bulk configuration of
- ranges, VLAN 1, See VLAN ranges, bulk configuration of RDI (remote defect indication) cells
- RDI (remote defect indication) cells 1
- reassembly 1
- Frame Relay packets 1
- MLPPP 1
- configuring dynamic 1
- configuring static 1
- overview 1
- reassigning profiles to dynamic interfaces 1
- relearn command 1
- remote circuit ID, capturing for PPPoE 1
- configuring 1
- dsl-forum-1 format and examples 1
- formatting 1
- monitoring 1
- overview 1
- sending to RADIUS or L2TP 1
- troubleshooting 1
- using in profiles 1
- remote defect indication cells. 1, See RDI cells
- round-robin packet distribution with MLPPP 1
- route interface command 1
- routing, configuring for transparent bridging 1
- RSTP (Rapid Spanning Tree Protocol) 1
- Ethernet link redundancy 1
S
- S-VLANs (stacked virtual local area networks) 1
- address possibilities 1
- bridged Ethernet configurations 1
- configuring PPPoE over S-VLAN 1
- configuring to support dynamic PPPoE 1
- configuring tunnel interfaces 1
- advantages 1
- example 1
- interface stacking 1
- displaying status 1
- oversubscription 1
- overview 1
- PPPoE over S-VLAN over bridged Ethernet 1
- scrambling ATM cell payload 1
- scripts 1
- using to configure dynamic interfaces 1
- SDH (Synchronous Digital Hierarchy) 1
- serial description command 1
- serial interfaces 1
- configuring 1
- Serial Line Address Resolution Protocol. 1, See SLARP
- service category, configuring for PVCs 1
- service name tables, PPPoE. 1, See PPPoE service name tables
- SFPs (small form-factor pluggable transceivers) 1
- short sequence number (SSN) header format 1
- show aaa commands 1
- show aaa tunnel-parameters 1
- show atm commands 1
- show atm aal5 interface 1
- show atm atm1483 1
- show atm bulk-config 1
- show atm interface 1
- show atm map 1
- show atm oam 1
- show atm ping 1
- show atm subinterface 1
- show atm vc 1
- show atm vc atm 1
- show atm vc-class 1
- show atm vp 1
- show atm vp-description 1
- show atm vp-tunnel 1
- show nbma arp 1
- show bridge commands 1
- show bridge 1
- show bridge groups 1
- show bridge interface 1
- show bridge port 1
- show bridge table 1
- show bridge1483 interface command 1
- show columns command 1
- show frame-relay commands 1
- show frame-relay interface 1
- show frame-relay lip 1
- show frame-relay lmi 1
- show frame-relay map 1
- show frame-relay multilinkInterface 1
- show frame-relay pvc 1
- show frame-relay subinterface 1
- show frame-relay summary 1
- show hdlc interface command 1
- show interfaces commands 1
- show interfaces fastEthernet 1
- show interfaces gigabitEthernet 1
- show interfaces lag 1
- show interfaces lag members 1
- show interfaces pos 1
- show interfaces tenGigabitEthernet 1
- show ip mac-validate command 1
- show mpls cross-connects atm command 1
- show ppp commands 1
- show ppp interface 1
- show ppp interface mlppp 1
- show ppp interface summary 1
- show pppoe commands 1
- show pppoe interface 1
- show pppoe interface lockout-time 1
- show pppoe interface summary 1
- show pppoe subinterface 1
- show pppoe subinterface summary 1
- show profile commands 1
- show profile 1
- show radius commands 1
- show radius override 1
- show radius remote-circuit-id-delimiter 1
- show radius remote-circuit-id-format 1
- show subscriber-policy command 1
- show vlan commands 1
- show vlan bulk-config 1
- show vlan subinterface 1
- show vlan subinterface command 1
- shutdown command 1
- dynamic interfaces 1
- Frame Relay 1
- POS 1
- shutting down interfaces 1
- dynamic ATM 1483 1
- dynamic VLAN 1
- Frame Relay 1
- POS 1
- Simple Network Management Protocol. 1, See SNMP link status processing
- SLARP (Serial Line Address Resolution Protocol) 1
- Keep-Alive protocol 1
- keepalive interval 1
- overview 1
See also- SMs (Service modules) 1
- MLPPP features 1
- SNAP (subnetwork attachment point) 1
- SNMP (Simple Network Management Protocol) link status processing 1
- snmp trap frame-relay link-status command 1
- SONET (Synchronous Optical Network) 1
- source, clock 1
- ATM interfaces 1
- SSN LCP (short sequence number Link Control Protocol) configuration option 1
- stacked virtual local area networks. 1, See S-VLANs
- stateful SRP switchover 1
- and atm atm1483 subscriber command 1
- and subscriber command 1
- static interfaces 1
- creating in VC subranges 1
- creating in VLAN subranges 1
- static mapping, and NBMA interfaces 1
- subinterfaces 1
- ATM 1483, dynamic 1
- ATM 1483, static 1
- Frame Relay, monitoring 1
- MLFR, monitoring 1
- VLAN, dynamic 1
- subnet mask 1
- assigning to PPP interface 1
- subnetwork attachment point. 1, See SNAP
- subranges, VC. 1, See VC subranges
- subscriber command 1
- subscriber management, using for subscriber authentication 1
- subscriber policies for transparent bridging 1
- configuring 1
- defined 1
- monitoring 1
See also- subscriber policy commands 1
- arp 1
- bridge subscriber-policy 1
- broadcast 1
- ip 1
- multicast 1
- pppoe 1
- relearn 1
- show subscriber-policy 1
- subscriber-policy 1
- unicast 1
- unknown-destination 1
- unknown-protocol 1
- subscribers 1
- authenticating on dynamic bridged Ethernet interfaces 1
- identifying for PPPoE 1
- support, technical 1, See technical support
- SVC (switched virtual circuit) 1
- ATM 1
- Frame Relay 1
- svlan commands 1
- svlan ethertype 1
- svlan id 1
- for S-VLAN tunnels 1
- for standard S-VLANs 1
- switch, 802.3ad 1
- switched virtual circuit. 1, See SVC
- Synchronous Digital Hierarchy. 1, See SDH
- Synchronous Optical Network. 1, See SONET
- system 1
- framing capabilities 1
- system clock 1
- selecting clock source 1
T
- technical support 1
- contacting JTAC 1
- terminated PPP session accounting statistics 1
- text and syntax conventions 1
- traffic management, ATM 1
- types 1
- traffic-shaping parameters 1
- transmit clock source, configuring 1
- ATM interfaces 1
- transparent bridging. 1, See bridging, transparent
- troubleshooting interfaces 1
- dynamic PPP and PPPoE 1
- PPP 1
- PPPoE 1
- TSMs (Tunnel Service modules) 1
- MLPPP features 1
U
- ubr command 1
- UNI (User-Network Interface) version 1
- unicast addressing 1
- unicast command 1
- Uniform Resource Locator messages. 1, See URL messages
- unknown- commands 1
- unknown-destination 1
- unknown-protocol 1
- URL (Uniform Resource Locator) messages 1
- User-Network Interface. 1, See UNI version
V
- vbr commands 1
- vbr-nrt 1
- vbr-rt 1
- VC (virtual channel) 1
- integrity 1
- per port, ATM 1
- VC (virtual circuit), monitoring 1
- VC classes 1
- assigning to 1
- ATM major interfaces 1
- dynamic ATM 1483 subinterfaces 1
- PVCs 1
- static ATM 1483 subinterfaces 1
- benefits 1
- configuring 1
- examples 1
- configuration 1
- precedence levels 1
- monitoring 1
- overview 1
- precedence levels 1
- upgrade considerations 1
- VC ranges, bulk configuration of 1
- assigning VC classes 1
- example 1
- oversubscription 1
- overview 1
- restarting LCP negotiations for PPPoA clients 1
- VC subranges 1
- changing 1
- adding to VC range 1
- changing administrative state 1
- configuring 1
- merging 1
- monitoring 1
- overview 1
- removing from VC range 1
- shortening or expanding 1
- creating static ATM interfaces in 1
- configuring 1
- monitoring 1
- overview 1
- overriding profile assignments 1
- oversubscription 1
- vc-class atm command 1
- VCC (virtual channel connection) 1
- VCD (virtual circuit descriptor) 1
- VCI (virtual channel identifier) 1
- vendor-specific attributes. 1, See VSAs
- versions 1
- UNI (User-Network Interface) 1
- virtual channel connection. 1, See VCC
- virtual channel identifier. 1, See VCI
- virtual channel. 1, See VC
- virtual circuit descriptor. 1, See VCD
- virtual circuit. 1, See VC, monitoring
- virtual connections, ATM 1
- virtual local area networks. 1, See VLANs
- virtual path connection. 1, See VPC
- virtual path descriptions, assigning 1
- virtual path identifier. 1, See VPI
- virtual path tunnels. 1, See VP tunnels, ATM
- virtual path. 1, See VP, monitoring
- vlan commands 1
- encapsulation vlan 1
- monitor vlan interface 1
- profile vlan override 1
- vlan advisory-rx-speed 1
- vlan advisory-tx-speed 1
- vlan auto-configure 1
- vlan auto-configure agent-circuit-identifier 1
- vlan bulk-config 1
- vlan bulk-config modify 1
- vlan bulk-config shutdown 1
- vlan description 1
- vlan id 1
- vlan profile 1
- vlan service-profile 1
- VLAN subinterfaces 1
- base profiles 1
- nested profile assignments 1
- overriding profile assignments 1
- VLAN subinterfaces, dynamic 1
- benefits of using 1
- bulk configuration of VLAN ranges 1
- changing VLAN subranges 1
- configuring 1
- configuring with agent-circuit-identifier information 1
- creating static VLAN interfaces in VLAN subranges 1
- monitoring 1
- overriding base profile assignments 1
- overview 1
- profiles for 1
- VLAN subranges 1
- changing 1
- adding to VLAN range 1
- changing administrative state 1
- configuring 1
- merging 1
- monitoring 1
- overview 1
- removing from VLAN range 1
- shortening or expanding 1
- creating static VLAN interfaces in 1
- configuring 1
- monitoring 1
- VLANs (virtual local area networks) 1
- bridged Ethernet configurations 1
- configuring 1
- configuring dynamic subinterfaces for 1
- configuring for dynamic IP 1
- configuring for dynamic PPPoE 1
- configuring to support dynamic PPPoE 1
- displaying status 1
- IP over VLAN over bridged Ethernet 1
- monitoring 1
- MPLS over VLAN over bridged Ethernet 1
- overview 1
- PPPoE over VLAN over bridged Ethernet 1
- VP (virtual path) tunnels, ATM 1
- overview 1
- per module assembly 1
- traffic rate 1
- VP (virtual path), monitoring 1
- VPC (virtual path connection) 1
- VPI (virtual path identifier) 1
- VSAs (vendor-specific attributes) 1
- DSL Forum 26-1 1
- levels of CLI access 1
- MLPPP Bundle Name 1
X
- X.21/V.35 interfaces 1
- MLPPP features 1
- XFPs (10-gigabit small form-factor pluggable transceivers) 1